
Davies Craig Electric Booster Pump, EBP23, 12V, Plastic, Black, Kit
$153.33
$204.44
Australian Owned
Worldwide shipping
Massive product range
Popular brands
Expert knowledge
Local support
EWP®115 Alloy Kit Remote Electric Water Pump (12V) (Part #8040)
The EWP®115 Alloy Electric Water Pump delivers 115 litres per minute of coolant flow and is ideal for small, medium, large, high-performance, and 4WD vehicles. It improves engine cooling control, capacity, and fuel economy while enhancing power and torque.
This pump is a practical alternative to belt-driven water pumps, which sap engine power. By hardwiring the EWP®115 into your electrical system, it bypasses the engine and releases up to an additional 10kW (13hp). It is also extensively used in intercooler applications.
KIT CONTENTS |
|
Part Description | Units |
EWP®115 Alloy 12V | 1 |
EWP® Basic Wiring Harness | 1 |
Hose Clamps | 2 |
Red Wire Joiner | 1 |
Red 6mm Ring Terminal | 1 |
Relay - 12V 40 Amp 5 Pin with Resistor Protection | 1 |
Screw - Self Tap 8x3/8 BZ | 1 |
TECHNICAL SPECIFICATIONS |
|
Voltage | 12 Volt Pump |
Operating Voltage | 3V DC to 15V DC |
Maximum Current | 10A @ 13V |
Flow Rate (Max) | 139 L/min (36.7 US gal/min) @ 13V DC |
Operating Temp. | -40°C to 120°C (-40°F to 248°F) |
Pump Design | Clockwise centrifugal with volute chamber |
Pump Weight | 920 grams (2.03 lbs) |
Pump Material | Aluminum (Powder Coated) |
Burst Pressure | 500 kPa (72.5 PSI) |
Seal | Ceramic Face Seal |
Self-Priming | No |
Fits Hose Sizes | 35mm to 51mm (1?" to 2") |
Push-On Fitting Size | 38mm Inlet & Outlet (Options: 44mm with 3mm Sleeve #8510, 51mm with 6mm Sleeve #8511) |
EWP & Controller Installation Demonstration
Davies Craig Electric Booster Pump, EBP23, 12V, Plastic, Black, Kit
$153.33
$204.44
Davies Craig Water Pump, Remote Electric, 150LPM/40GPM, EWP150, 12V w/ Controller, Kit
$465.96
$621.28
Davies Craig Electric Booster Pump, EBP25, 12V, Plastic, Black, Kit
$212.23
$282.98
Davies Craig Water Pump, Remote Electric, 80LPM/21GPM, EWP80, 12V, Kit
$174.12
$232.16