Proflow's LS water cross over kits eliminate trapped air and steam from your cylinder heads, preventing hot spots and overheating. This can cause head gasket failures, lean cylinders and pre-ignition. They connect to the vent ports on each corner of the cylinder heads (2 port or 4 ports options available), which is then routed to either the radiator or water pump. This kit includes stainless steel PTFE black braided hose and the appropriate fittings and distribution blocks for a simple installation. They also offer a more attractive look than the OE rigid hard lines and provide flexibility when using aftermarket intakes and other accessories on performance LS vehicles. Will not suit factory intake (requires 20mm of clearance under the manifold).

Note : 90 Degree hose ends will swivel for a relaxed fit, but must be supported when rotating to avoid teflon hose from being damaged 

Suits the following engines:

  • LS1/LS6
  • LS2/LS3/L76/L77/L98

More From This Category

Proflow Master Cylinder Reservoir, Remote or Direct Mount, 130mm Height, 80mm Dia, Billet Aluminium, Black

Proflow Master Cylinder Reservoir, Remote or Direct Mount, 130mm Height, 80mm Dia, Billet Aluminium, Black

$209.44

Proflow Exhaust Hanger Stainless Rod Universal 1/2 90 Deg 9in. long

Proflow Exhaust Hanger Stainless Rod Universal 1/2 90 Deg 9in. long

$41.63

Proflow Chrome Moly Pushrods 8.350" x 5/16", .110" Wall Thickness, 210 deg Radius Ball End, Heat Treated, Each

Proflow Chrome Moly Pushrods 8.350" x 5/16", .110" Wall Thickness, 210 deg Radius Ball End, Heat Treated, Each

$20.00

Proflow Carburettor Scoop, Aluminium Polished, Mini Hilborn-Style, Single Carburettor, Each

Proflow Carburettor Scoop, Aluminium Polished, Mini Hilborn-Style, Single Carburettor, Each

$304.50