Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step:
  • Torque Capacity: Peak: 297Nm, Rated: 237Nm
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB520
  • Alignment Tool: CAT120

    • Fitment:
  • Nissan 240K 1973-1979, 2.4 Ltr, L24 Some Hard Tops, HGC110, 1/73-12/79
  • Nissan 240K 1973-1979, 2.4 Ltr, L24 Some Hard Tops, KHG110, 1/73-12/79
  • Nissan 260Z 1974-1978, 2.6 Ltr, L26 Sports 2+2 Coupe, GLR230, 1/74-12/78
  • Nissan 280C 1975-1979, 2.8 Ltr, L28 KP330, 1/75-12/79
  • Nissan 280C 1975-1979, 2.8 Ltr, L28 P330, 1/75-12/79
  • Nissan 280C 1982-1983, 2.8 Ltr, L28 P430, 1/82-6/83
  • Nissan 280C 1975-1979, 2.8 Ltr, L28 WP330, 1/75-12/79
  • Nissan 280ZX 1978-1983, 2.8 Ltr, L28 HGS310, 6/78-6/83
  • Nissan 280ZX 1978-1984, 2.8 Ltr, L28 HS310, 1/78-12/84
  • Nissan 280ZX 1978-1984, 2.8 Ltr, L28 KHG310, 1/78-12/84
  • Nissan 720 Series 1979-1985, 1.8 Ltr, L18 720 (incl 4WD), 9/79-8/85
  • Nissan 720 Series 1983-1985, 2.2 Ltr, Z22 720 (incl 4WD), 4/83-8/85
  • Nissan Caball 1976-1981, 2.0 Ltr, H20 C340, 1/76-12/81
  • Nissan Caball 1976-1981, 2.0 Ltr, H20 HC340, 1/76-12/81
  • Nissan Cabstar 1982-1985, 2.5 Ltr, SD25 EF22, 1/82-3/85
  • Nissan Cabstar 1982-1984, 2.0 Ltr Petrol H40, 1/82-12/84
  • Nissan Cabstar 1982-1986, 2.2 Ltr Petrol, Z22S KUH40, 1/82-10/86
  • Nissan Cabstar 1982-1984, 2.0 Ltr Petrol, Z20 PF22, 1/82-9/84
  • Nissan Cabstar 1982-1986, 2.2 Ltr Petrol, Z22S UGH40, 1/82-10/86
  • Nissan Cabstar 1982-1986, 2.2 Ltr Petrol, Z22S UH40, 1/82-10/86
  • Nissan Cefiro 1988-1992, 2.0 Ltr Non Turbo, RB20DE 9/88-4/92, New Zealand Only
  • Nissan E20 Urvan 1976-1982, 2.0 Ltr, H20 GPKE20, 1/76-5/82
  • Nissan E20 Urvan 1976-1986, 1.6 Ltr, J16 VE20, 1/76-12/86
  • Nissan E20 Urvan 1976-1982, 2.0 Ltr, H20 VPE20, 1/76-5/82
  • Nissan E23 Urvan 1976-1986, 2.0 Ltr, H20 1/76-12/86
  • Nissan E23 Urvan 1980-1982, 2.2 Ltr Diesel, SD22 1/80-12/82
  • Nissan E23 Urvan 1976-1986, 2.0 Ltr, Z20 1/76-12/86
  • Nissan Homer 1976-1981, 2.0 Ltr, H20 PF20, 1/76-12/81
  • Nissan Laurel 1986-1989, 2.8 Ltr Diesel, RD28 C32, 1/86-12/89
  • Nissan Laurel 1989-1993, 2.0 Ltr, RB20E C33, 1/89-12/93
  • Nissan Navara 1985-1987, 1.8 Ltr, Z18 D21, 8/85-8/87, New Zealand Model
  • Nissan Silvia 1985-1986, 2.0 Ltr, FJ20 S12, 1/85-2/86
  • Nissan Skyline 1978-1986, 2.4 Ltr, L24 C210, 1/78-12/86
  • Nissan Skyline 1978-1986, 2.4 Ltr G210, 1/78-12/86
  • Nissan Skyline 1981-1985, 2.4 Ltr, L24E, 94kw R30, 8/81-8/85
  • Nissan Skyline 1980-1985, 2.0 Ltr Turbo, L20ET R30, 4/80-8/85
  • Nissan Skyline 1985-1990, 2.0 Ltr, RB20ET, 108kw R31, 12/85-3/9Nissan Skyline 1993-1997, 2.0 Ltr, RB20E, 96kw R33, 8/93-12/97

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 255 mm x 23T x 26.0 mm, For Holden Commodore 2010-2013, 3.6 Ltr SIDI, 210kw VE Series II, 6 Speed, 9/10-4/13, Kit

    PHC Clutch Clutch Kit, PHC Standard, 255 mm x 23T x 26.0 mm, For Holden Commodore 2010-2013, 3.6 Ltr SIDI, 210kw VE Series II, 6 Speed, 9/10-4/13, Kit

    $1,784.57

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 200 mm x 21T x 29.0 mm, For Toyota Corona 1970-1974, 1.5 Ltr, 2R RT80, 1/70-12/74, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 200 mm x 21T x 29.0 mm, For Toyota Corona 1970-1974, 1.5 Ltr, 2R RT80, 1/70-12/74, Kit

    $77.34

    PHC Clutch Clutch Kit, PHC Standard, 228 mm x 14T x 25.0 mm, For Saab 9-3 1998-2003, 2.0 Ltr ICT, B204L, 136kw 4/98-7/03, Kit

    PHC Clutch Clutch Kit, PHC Standard, 228 mm x 14T x 25.0 mm, For Saab 9-3 1998-2003, 2.0 Ltr ICT, B204L, 136kw 4/98-7/03, Kit

    $377.58

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 10T x 29.0 mm, For BMW 330 2000-2003, 3.0 Ltr MPFI, M54306S3, 170kw 330Ci E46, 6 Speed Sequential, 6/00-

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 10T x 29.0 mm, For BMW 330 2000-2003, 3.0 Ltr MPFI, M54306S3, 170kw 330Ci E46, 6 Speed Sequential, 6/00-

    $235.63

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 215 mm x 24T x 25.5 mm, For Holden Rodeo 1988-1993, 2.3 Ltr, 4ZD1 KB29 (incl 4WD), 1/88-12/93, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 215 mm x 24T x 25.5 mm, For Holden Rodeo 1988-1993, 2.3 Ltr, 4ZD1 KB29 (incl 4WD), 1/88-12/93, Kit

    $130.98

    PHC Clutch Clutch Kit, PHC Standard, 180 mm x 18T x 20.5 mm, For Nissan 1200 1970-1979, 1.2 Ltr, A12 B110, 1/70-12/79, Kit

    PHC Clutch Clutch Kit, PHC Standard, 180 mm x 18T x 20.5 mm, For Nissan 1200 1970-1979, 1.2 Ltr, A12 B110, 1/70-12/79, Kit

    $157.34