Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step:
  • Torque Capacity: Peak: 523Nm, Rated: 419Nm
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB502
  • Alignment Tool: CAT180

    • Fitment:
  • Daihatsu Delta 1982-1984, 3.4 Ltr, 3B V40, 1/82-12/84
  • Daihatsu Delta 1982-1984, 3.4 Ltr, 3B V42, 1/82-12/84
  • Daihatsu Delta 1982-1984, 3.4 Ltr, 3B V47, 1/82-12/84
  • Daihatsu Delta 1982-1984, 3.4 Ltr, 3B V48, 1/82-12/84
  • Daihatsu Delta 1984-1989, 3.4 Ltr, 13B V70, 1/84-12/89
  • Daihatsu Delta 1984-1989, 3.4 Ltr, 13B V75, 1/84-12/89
  • Daihatsu Delta 1984-1989, 3.4 Ltr, 13B V76, 11/84-1/89
  • Daihatsu Delta 1984-1989, 3.4 Ltr, 13B V78, 11/84-12/89
  • Daihatsu Delta 1984-1989, 3.4 Ltr, 13B V79, 11/84-12/89
  • Daihatsu Delta 1980-1988, 3.0 Ltr, B V90, 8/80-7/88
  • Daihatsu Delta 1980-1988, 3.0 Ltr, B V92, 8/80-7/88
  • Daihatsu Delta 1984-1988, 3.0 Ltr, B V98, 11/84-8/88
  • Daihatsu Delta 1985-1988, 3.0 Ltr, B V99, 1/85-8/88
  • Toyota Coaster 1982-1989, 3.4 Ltr Diesel, 13B Bus, BB20, 1/82-10/89
  • Toyota Coaster 1982-1989, 3.4 Ltr Diesel, 3B Bus, BB20, 8/82-10/89
  • Toyota Coaster 1982-1989, 3.4 Ltr Diesel, 3B Bus, BB21, 1/82-10/89
  • Toyota Coaster 1982-1989, 3.4 Ltr Diesel, 13B Bus, BB21, 1/82-10/89
  • Toyota Dyna 1980-1984, 3.0 Ltr, B BU30, 8/80-9/84
  • Toyota Dyna 1981-1984, 3.4 Ltr, 3B BU30, 7/81-8/84
  • Toyota Dyna 1981-1984, 3.4 Ltr, 3B BU32, 7/81-8/84
  • Toyota Dyna 1981-1984, 3.4 Ltr, 3B BU35, 7/81-8/84
  • Toyota Dyna 1981-1984, 3.4 Ltr, 3B BU36, 7/81-8/84
  • Toyota Dyna 1984-1989, 3.0 Ltr, 11B BU60, 9/84-7/89
  • Toyota Dyna 1984-1989, 3.0 Ltr, B BU60, 9/84-7/89
  • Toyota Dyna 1987-1989, 3.0 Ltr, 11B BU61, 8/87-7/89
  • Toyota Dyna 1984-1989, 3.0 Ltr, B BU61, 9/84-7/89
  • Toyota Dyna 1984-1989, 3.0 Ltr, B BU63, 9/84-7/89
  • Toyota Dyna 1984-1989, 3.0 Ltr, B BU65, 9/84-7/89
  • Toyota Dyna 1984-1987, 3.0 Ltr, B BU70, 9/84-8/87
  • Toyota Dyna 1984-1987, 3.0 Ltr, B BU80, 9/84-8/87
  • Toyota Dyna 1984-1989, 3.4 Ltr, 13B BU85, 9/84-7/89
  • Toyota Landcruiser 1980-1984, 3.4 Ltr Diesel, 3B BJ40, 8/80-10/84
  • Toyota Landcruiser 1980-1984, 3.4 Ltr Diesel, 3B BJ42, 8/80-10/84
  • Toyota Landcruiser 1980-1984, 3.4 Ltr Diesel, 3B BJ60, 8/80-10/84
  • Toyota Landcruiser 1980-1986, 3.4 Ltr Diesel, 3B BJ61, 8/80-8/86
  • Toyota Landcruiser 1984-1990, 3.4 Ltr Diesel, 3B BJ70, 11/84-1/9Toyota Landcruiser 1984-1990, 3.4 Ltr Diesel, 3B BJ73, 11/84-1/9Toyota Landcruiser 1984-1989, 3.4 Ltr Diesel, 3B BJ75, 11/84-12/89

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 225 mm x 22T x 24.5 mm, For Ford Laser 2001-2002, 2.0 Ltr EFI, FS KQ, 4/01-10/02, Kit

    PHC Clutch Clutch Kit, PHC Standard, 225 mm x 22T x 24.5 mm, For Ford Laser 2001-2002, 2.0 Ltr EFI, FS KQ, 4/01-10/02, Kit

    $233.28

    View
    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 23T x 25.8 mm, Rover SD1 1976-1984, 3.5 Ltr, V8 3500S, 5 Speed, 4/76-10/84, Kit

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 23T x 25.8 mm, Rover SD1 1976-1984, 3.5 Ltr, V8 3500S, 5 Speed, 4/76-10/84, Kit

    $364.99

    View
    Hays Clutch Kit, Spring Hub, 10 Spline, 11 Disc Dia., 1-1/16 in. Input Shaft, 450 Horsepower, Organic, 1966-71 For Ford & For Mercury, Kit

    Hays Clutch Kit, Spring Hub, 10 Spline, 11 Disc Dia., 1-1/16 in. Input Shaft, 450 Horsepower, Organic, 1966-71 For Ford & For Mercury, Kit

    $784.25

    View
    PHC Clutch Clutch Kit, PHC Standard, 180 mm x 20T x 22.1 mm, For Daihatsu Copen 2003-2005, 659cc Turbo, JB-DET, 50kw L880, 5 Speed, 10/03-12/05, Kit

    PHC Clutch Clutch Kit, PHC Standard, 180 mm x 20T x 22.1 mm, For Daihatsu Copen 2003-2005, 659cc Turbo, JB-DET, 50kw L880, 5 Speed, 10/03-12/05, Kit

    $334.56

    View
    Mantic Clutch System, High Performance Multi-Plate, 225 mm x 26T x 29.0 mm, For Ford Mustang 4.6 Ltr, V8, 224kw Bullit, 1/05-12/10, 26T spline / 6 Cra

    Mantic Clutch System, High Performance Multi-Plate, 225 mm x 26T x 29.0 mm, For Ford Mustang 4.6 Ltr, V8, 224kw Bullit, 1/05-12/10, 26T spline / 6 Cra

    $2,163.19

    View