Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step:
  • Torque Capacity: Peak: 557Nm, Rated: 446Nm
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB528
  • Alignment Tool: CAT147

    • Fitment:
  • Ford Falcon 1978-1979, 6 Cyl XC, 4 Speed, 7/78-2/79
  • Ford Falcon 1979-1982, 6 Cyl XD, 4 Speed, 3/79-2/82
  • Ford Falcon 1982-1984, 6 Cyl XE, 4 Speed, 3/82-9/84
  • Ford Falcon 1982-1984, 6 Cyl XE, 5 Speed, 3/82-9/84
  • Ford Falcon 1984-1988, 3.3 Ltr, 6 Cyl XF, 4 Speed, 10/84-12/88
  • Ford Falcon 1984-1988, 4.1 Ltr, 6 Cyl XF, 4 Speed, 10/84-12/88
  • Ford Falcon 1984-1988, 3.3 Ltr, 6 Cyl XF, 5 Speed, 10/84-12/88
  • Ford Falcon 1984-1988, 4.1 Ltr EFI, 6 Cyl XF Unleaded, 5 Speed, 10/84-12/88
  • Ford Falcon 1984-1988, 4.1 Ltr EFI, 6 Cyl XF Unleaded, 4 Speed, 10/84-12/88
  • Ford Falcon 1988-1992, 3.9 Ltr EFI, 6 Cyl EA, 1/88-4/92
  • Ford Falcon 1988-1991, 3.2 Ltr EFI, 6 Cyl EA, 3/88-6/91
  • Ford Falcon 1991-1992, 3.2 Ltr EFI, 6 Cyl EB Series I, 7/91-4/92
  • Ford Falcon 1991-1992, 3.9 Ltr EFI, 6 Cyl EB Series I, 7/91-4/92
  • Ford Falcon (Ute & Van) 1988-1993, 3.9 Ltr, 6 Cyl Ute & Van, XF, 5 Speed, 1/88-12/93
  • Ford Falcon (Ute & Van) 1988-1993, 3.3 Ltr, 6 Cyl Ute & Van, XF, 5 Speed, 1/88-12/93
  • Ford Falcon (Ute & Van) 1988-1993, 4.1 Ltr, 6 Cyl Ute & Van, XF, 5 Speed, 1/88-12/93
  • Nissan XFN 1988-1991, 4.1 Ltr Petrol Ute, ST, 5 Speed, 1/88-12/91
  • Ford Fairmont 1979-1980, 3.3 Ltr, Cast Head, 82kw XD, 4 Speed, 3/79-6/8Ford Fairmont 1980-1982, 3.3 Ltr, Alloy Head, 84kw XD, 4 Speed, 6/80-4/82
  • Ford Fairmont 1979-1980, 4.1 Ltr, Cast Head, 94kw XD, 4 Speed, 3/79-6/8Ford Fairmont 1980-1982, 4.1 Ltr, Alloy Head, 94kw XD, 4 Speed, 6/80-4/82
  • Ford Fairmont 1982-1982, 3.3 Ltr, 6 Cyl, 90kw XE, 4 Speed, 3/82-2/82
  • Ford Fairmont 1982-1982, 3.3 Ltr, 6 Cyl, 90kw XE, 5 Speed, 3/82-2/82
  • Ford Fairmont 1982-1984, 4.1 Ltr, 6 Cyl, 105kw XE, 4 Speed, 3/82-9/84
  • Ford Fairmont 1986-1988, 4.1 Ltr EFI, 6 Cyl, 121kw XF, 5 Speed, 10/86-12/88
  • Ford Fairmont 1984-1988, 4.1 Ltr EFI, 6 Cyl, 121kw XF, 4 Speed, 10/84-12/88
  • Ford Fairmont 1988-1992, 3.9 Ltr TBI, 6 Cyl, 120kw EA, 5 Speed, 1/88-4/92
  • Ford Fairmont 1988-1992, 3.9 Ltr MPFi, 6 Cyl, 139kw EA, 5 Speed, 1/88-4/92

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 235 mm x 21T x 29.0 mm, For Toyota Celica 1986-1989, 2.0 Ltr, 3SG-T ST165, 4WD, 10/86-8/89, Kit

    PHC Clutch Clutch Kit, PHC Standard, 235 mm x 21T x 29.0 mm, For Toyota Celica 1986-1989, 2.0 Ltr, 3SG-T ST165, 4WD, 10/86-8/89, Kit

    $441.31

    Mantic Clutch Kit, Stage 3, Performance, 280 mm x 10T x 27.5 mm, For Ford Falcon 5.4 Ltr, 220kw BA, 5 Speed, 10/03-9/05 2003-2005, Kit

    Mantic Clutch Kit, Stage 3, Performance, 280 mm x 10T x 27.5 mm, For Ford Falcon 5.4 Ltr, 220kw BA, 5 Speed, 10/03-9/05 2003-2005, Kit

    $495.20

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 225 mm x 23T x 26.3 mm, For Mitsubishi Sigma 1982-1984, 2.6 Ltr GJ, MMC 5 Speed, 3/82-3/84, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 225 mm x 23T x 26.3 mm, For Mitsubishi Sigma 1982-1984, 2.6 Ltr GJ, MMC 5 Speed, 3/82-3/84, Kit

    $270.98

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 250 mm x 24T x 25.5 mm, For Holden Rodeo 2002-2003, 3.0 Ltr TDI, 4JH1T R9, 4/02-2/03, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 250 mm x 24T x 25.5 mm, For Holden Rodeo 2002-2003, 3.0 Ltr TDI, 4JH1T R9, 4/02-2/03, Kit

    $495.54

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 23T x 24.2 mm, For Audi Allroad 2000-2005, 2.7 Ltr MPFI Twin Turbo, BES, 184kw Quattro, 6 Speed, 5/00-8/

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 23T x 24.2 mm, For Audi Allroad 2000-2005, 2.7 Ltr MPFI Twin Turbo, BES, 184kw Quattro, 6 Speed, 5/00-8/

    $1,902.95

    PHC Clutch Clutch Kit, PHC Standard, 325 mm x 12T x 35.0 mm, For Hino Bus BX Series 1979-1984, 6.4 Ltr, EH700 BX341, 5 Speed, 1/79-12/84, Kit

    PHC Clutch Clutch Kit, PHC Standard, 325 mm x 12T x 35.0 mm, For Hino Bus BX Series 1979-1984, 6.4 Ltr, EH700 BX341, 5 Speed, 1/79-12/84, Kit

    $674.82