Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Concentric slave cylinder

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step:
  • Torque Capacity: Peak: 856Nm, Rated: 685Nm
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Included
  • Spigot: RSB528
  • Alignment Tool: CAT100

    • Fitment:
  • Ford Falcon 2008-2011, 5.4 Ltr, 220kw FG, 6 Speed, 4/08-9/11
  • Ford Falcon 2008-on, 4.0 Ltr MPFI, Turbo, 270kw FG XR6T, 6 Speed, 4/08-
  • Ford Falcon 2008-2011, 5.4 Ltr, 260kw FG XR8, 6 Speed, 4/08-9/11
  • Ford Falcon 2012-on, 4.0 Ltr MPFI, Turbo, 270kw FG X XR6T, 6 Speed, 4/12-

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 26T x 28.7 mm, For Mercedes Benz Vito 1997-2003, 2.0 Ltr DOHC, M 111.948, 95kw 113, 5 Speed, 3/97-7/03,

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 26T x 28.7 mm, For Mercedes Benz Vito 1997-2003, 2.0 Ltr DOHC, M 111.948, 95kw 113, 5 Speed, 3/97-7/03,

    $2,306.11

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 18T x 21.0 mm, For Citroen Xsara 1998-2001, 1.8 Ltr 16V, 84kw 8/98-2/01, Kit

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 18T x 21.0 mm, For Citroen Xsara 1998-2001, 1.8 Ltr 16V, 84kw 8/98-2/01, Kit

    $287.87

    PHC Clutch Clutch Kit, PHC Standard, 220 mm x 43T x 70.2 mm, Austin Kimberly 1970-1973, X6, 1/70-12/73, Kit

    PHC Clutch Clutch Kit, PHC Standard, 220 mm x 43T x 70.2 mm, Austin Kimberly 1970-1973, X6, 1/70-12/73, Kit

    $560.60

    PHC Clutch Clutch Kit, PHC Standard, 267 mm x 23T x 26.3 mm, For Land Rover 109 1982-1984, 3.5 Ltr, V8 Series III 4WD, 5 Speed, 1/82-12/84, Kit

    PHC Clutch Clutch Kit, PHC Standard, 267 mm x 23T x 26.3 mm, For Land Rover 109 1982-1984, 3.5 Ltr, V8 Series III 4WD, 5 Speed, 1/82-12/84, Kit

    $276.81

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 10T x 29.0 mm, For BMW 635 1987-1991, 3.5 Ltr, M30-B35, 155kw 635CSi E24, 7/87-12/91, Kit

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 10T x 29.0 mm, For BMW 635 1987-1991, 3.5 Ltr, M30-B35, 155kw 635CSi E24, 7/87-12/91, Kit

    $749.10

    PHC Clutch Clutch Kit, PHC Standard, 260 mm x 21T x 29.8 mm, For Toyota Hiace 1993-1995, 3.0 Ltr TDI, 1KZ KZH100, 8/93-8/95, Kit

    PHC Clutch Clutch Kit, PHC Standard, 260 mm x 21T x 29.8 mm, For Toyota Hiace 1993-1995, 3.0 Ltr TDI, 1KZ KZH100, 8/93-8/95, Kit

    $357.72