Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step:
  • Torque Capacity:
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB502
  • Alignment Tool: CAT212

    • Fitment:
  • Toyota Coaster 2003-2006, 4.1 Ltr Diesel, 15B, 100kw BB50R, 6 Speed, 3/03-9/06
  • Toyota Dyna 1995-on, 4.1 Ltr TDI, 15BT BU102, 5/95-
  • Toyota Dyna 1995-on, 4.1 Ltr TDI, 15BT BU132, 5/95-
  • Toyota Dyna 1995-on, 4.1 Ltr TDI, 15BT BU142, 5/95-
  • Toyota Dyna 1995-on, 4.1 Ltr TDI, 15BT BU212, 5/95-
  • Toyota Dyna 1997-2003, 4.1 Ltr, 15B-F BU212, 11/97-5/03
  • Toyota Dyna 1995-on, 4.1 Ltr TDI, 15BT BU222, 5/95-
  • Toyota Dyna 2003-2011, 4.0 Ltr TDI, N04C XZU304, 10/03-6/11, New Zealand Only
  • Toyota Dyna 1999-2006, 4.9 Ltr TDI, S05DA XZU306, 5/99-10/06, New Zealand Only
  • Toyota Dyna 1999-2004, 4.6 Ltr TDI, S05CA XZU312, 5/99-6/04, New Zealand Only
  • Toyota Dyna 2003-2004, 4.0 Ltr TDI, N04CTF XZU345, 1/03-12/04, New Zealand Only
  • Toyota Dyna 1999-2004, 4.6 Ltr TDI, S05CA XZU362, 7/99-6/04, New Zealand Only
  • Toyota Toyoace 1995-1999, 4.1 Ltr Diesel, 15BF BU102, 5/95-5/99, New Zealand Only
  • Toyota Toyoace 1995-1999, 4.1 Ltr Tdi, 15BFT BU212, 5 Speed, 5/95-5/99, New Zealand Only

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 280 mm x 10T x 27.5 mm, For Holden With Conversion G/Box 1968-on, 350ci, V8 push type fork, For Ford G/Box, 1/68-

    PHC Clutch Clutch Kit, PHC Standard, 280 mm x 10T x 27.5 mm, For Holden With Conversion G/Box 1968-on, 350ci, V8 push type fork, For Ford G/Box, 1/68-

    $154.19

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 180 mm x 18T x 20.5 mm, For Holden Astra 1984-1986, 1.5 Ltr LB, 8/84-3/86, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 180 mm x 18T x 20.5 mm, For Holden Astra 1984-1986, 1.5 Ltr LB, 8/84-3/86, Kit

    $243.01

    Mantic Clutch System, High Performance Multi-Plate, 225 mm x 24T x 25.5 mm, For Nissan 300ZX 3.0 Ltr Twin Turbo, VG30DETT, 208kw Z32, 7/89-4/00 1989-2

    Mantic Clutch System, High Performance Multi-Plate, 225 mm x 24T x 25.5 mm, For Nissan 300ZX 3.0 Ltr Twin Turbo, VG30DETT, 208kw Z32, 7/89-4/00 1989-2

    $1,358.16

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 215 mm x 24T x 26.0 mm, For Honda Accord 2001-2006, 2.0 Ltr, K20A CL7, 1/01-12/06, New Zealand Model,

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 215 mm x 24T x 26.0 mm, For Honda Accord 2001-2006, 2.0 Ltr, K20A CL7, 1/01-12/06, New Zealand Model,

    $329.48

    PHC Clutch Clutch Kit, PHC Standard, 300 mm x 12T x 28.0 mm, For Ford Trader 1995-1999, 4.6 Ltr Diesel 0811, 11/95-4/99, Kit

    PHC Clutch Clutch Kit, PHC Standard, 300 mm x 12T x 28.0 mm, For Ford Trader 1995-1999, 4.6 Ltr Diesel 0811, 11/95-4/99, Kit

    $852.34

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 17T x 19.8 mm, For Renault Megane 2007-on, 2.0 Ltr MPFI, F4R 770, 99KW 6 Speed, 7/07-, New Zealand Model

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 17T x 19.8 mm, For Renault Megane 2007-on, 2.0 Ltr MPFI, F4R 770, 99KW 6 Speed, 7/07-, New Zealand Model

    $2,214.85