Designed and manufactured to replace the clutch system installed as Original Equipment, a Heavy Duty replacement clutch kit features a torque capacity increase due to a higher clamp load (typically 20% increase compared with original equipment (OE). Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 15 years of experience in developing and manufacturing clutch kits for Aftermarket use, PHC is the trusted source for a complete range of Clutch Kits suited to your vehicle. PRODUCT NOTES: PHC Heavy Duty Clutch Kits are manufactured with a (typical) 20% increase in clamp load, resulting in an equivalent increase in torque capacity. Increasing clamp load by more than 20% can put the vehicles hydraulic system under stress, significantly reduce clutch system life and result in very high clutch pedal actuation effort. Therefore if additional torque capacity is required, please consider a 4Terrain or Mantic clutch kit to suit your application. Beware of imitation products with clamp loads greater than 20% over OE specification. Heavy Duty clutch kits with a SSCC/SSC/SC suffix, feature upgrade cerametallic clutch plates. SSCC clutch plates feature dual sided cerametallic friction material, designed to further increase torque capacity, with a moderate reduction in pedal feel and more sudden engagement. SSC clutch plates feature dual sided cerametallic friction material with no segment cushioning, designed to further increase torque capacity, with a significant reduction in pedal feel and aggressive sudden engagement. SC clutch plates feature dual sided cerametallic friction material with no segment cushioning and a non-sprung hub, designed to further increase torque capacity, but offering very little pedal feel and ultra aggressive sudden engagement - not suitable for street use.

This kit includes : Heavy duty cover assembly with 20% (typical) increase in torque capacity / clamp load, Clutch plate, Release bearing

Features and Specifications
  • Heavy Duty Clutch Kit Suits OE Flywheel
  • Typical 20% Increase in Torque Capacity
  • Dual Mass Flywheel: Not Included
  • Flywheel Step:
  • Torque Capacity:
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB520
  • Alignment Tool: CAT120

    • Fitment:
  • Nissan Cabstar 1984-1990, 2.0 Ltr Petrol, Z20 PF22, 10/84-6/9Nissan Cabstar 1984-1990, 2.0 Ltr Petrol, Z20 PH40, 6/84-6/9Nissan Caravan 2001-2007, 2.0 Ltr, KA20DE, 89kw VPE25, 4/01-9/07, New Zealand Model
  • Nissan E24 Urvan 1986-1993, 2.4 Ltr, Z24i VNGE24, 1/86-9/93
  • Nissan E24 Urvan 1986-1993, 2.4 Ltr, Z24i WNGE24, 11/86-9/93
  • Nissan Navara 1986-1992, 2.0 Ltr, Z20, 66kw D21, 4 Speed, 1/86-5/92
  • Nissan Navara 1992-1995, 2.0 Ltr Carby, Z20, 66kw D21, 5 Speed, 6/92-10/95
  • Nissan Navara 1992-1997, 2.4 Ltr SOHC EFI, KA24E, 91kw D21, 5 Speed, 6/92-3/97
  • Nissan Navara 1989-1996, 2.0 Ltr, NA20 D21, 9/89-8/96, New Zealand Model
  • Nissan Navara 1986-1992, 2.4 Ltr SOHC, Z24, 74kw D21, 4 Speed, 1/86-1/92
  • Nissan Navara 1997-1999, 2.4 Ltr SOHC EFI, KA24E, 93kw D22, 5 Speed, 3/97-8/99
  • Nissan Navara 1999-2005, 2.4 Ltr DOHC EFI, KA24DE, 110kw Cab Chassis, D22, 5 Speed, 8/99-12/05
  • Nissan Pathfinder 1987-1992, 2.4 Ltr, Z24 WNYD21, 1/87-9/92
  • Nissan Silvia 1983-1986, 2.0 Ltr Turbo, FJ20T S12, 8/83-2/86
  • Nissan Skyline 1993-1995, 2.5 Ltr, RB25DE, 149kw ECR33, 8/93-12/95
  • Nissan Skyline 1998-2001, 2.5 Ltr Non Turbo, RB25DE, 149kw R34, 2/98-5/01

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 235 mm x 21T x 29.0 mm, For Toyota Celica 1986-1989, 2.0 Ltr, 3SG-T ST165, 4WD, 10/86-8/89, Kit

    PHC Clutch Clutch Kit, PHC Standard, 235 mm x 21T x 29.0 mm, For Toyota Celica 1986-1989, 2.0 Ltr, 3SG-T ST165, 4WD, 10/86-8/89, Kit

    $441.31

    Mantic Clutch Kit, Stage 3, Performance, 280 mm x 10T x 27.5 mm, For Ford Falcon 5.4 Ltr, 220kw BA, 5 Speed, 10/03-9/05 2003-2005, Kit

    Mantic Clutch Kit, Stage 3, Performance, 280 mm x 10T x 27.5 mm, For Ford Falcon 5.4 Ltr, 220kw BA, 5 Speed, 10/03-9/05 2003-2005, Kit

    $495.20

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 225 mm x 23T x 26.3 mm, For Mitsubishi Sigma 1982-1984, 2.6 Ltr GJ, MMC 5 Speed, 3/82-3/84, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 225 mm x 23T x 26.3 mm, For Mitsubishi Sigma 1982-1984, 2.6 Ltr GJ, MMC 5 Speed, 3/82-3/84, Kit

    $270.98

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 250 mm x 24T x 25.5 mm, For Holden Rodeo 2002-2003, 3.0 Ltr TDI, 4JH1T R9, 4/02-2/03, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 250 mm x 24T x 25.5 mm, For Holden Rodeo 2002-2003, 3.0 Ltr TDI, 4JH1T R9, 4/02-2/03, Kit

    $495.54

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 23T x 24.2 mm, For Audi Allroad 2000-2005, 2.7 Ltr MPFI Twin Turbo, BES, 184kw Quattro, 6 Speed, 5/00-8/

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 23T x 24.2 mm, For Audi Allroad 2000-2005, 2.7 Ltr MPFI Twin Turbo, BES, 184kw Quattro, 6 Speed, 5/00-8/

    $1,902.95

    PHC Clutch Clutch Kit, PHC Standard, 325 mm x 12T x 35.0 mm, For Hino Bus BX Series 1979-1984, 6.4 Ltr, EH700 BX341, 5 Speed, 1/79-12/84, Kit

    PHC Clutch Clutch Kit, PHC Standard, 325 mm x 12T x 35.0 mm, For Hino Bus BX Series 1979-1984, 6.4 Ltr, EH700 BX341, 5 Speed, 1/79-12/84, Kit

    $674.82