Designed and manufactured to replace the clutch system installed as Original Equipment, a Mantic Stage 3 replacement clutch kit offers a strong torque capacity increase. Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 70 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, CI is the trusted source for a complete range of Clutch Kits suited to your vehicle. MANTIC STAGE SERIES COVER ASSEMBLY: Performance Clutch Systems for street use require increased torque capacity while retaining good pedal feel with fine modulation control. These characteristics inevitably increase heat which reduces service life. So the ideal performance clutch system for the street must also have improved heat dissipation. Mantic Stage 3 clutch kits feature a 20% increase (over original equipment) in clamp load for increased torque capacity. SPHEROIDAL GRAPHITE CASTINGS: Approximately 300% stronger than a standard casting this material (sometimes referred to as an Anti Burst casting) not only increases strength by up to 3 times, it also improves heat dispersion. BALANCED COVERS: To insure that the clutch system performs at maximum efficiency and that no unwanted vibration is generated as the cover spins, all Mantic Stage cover assemblies undergo a 2 stage balancing process. CERAMETALLIC FRICTION MATERIAL CLUTCH PLATE: The Torque Capacity of a Clutch Plate can be increased by using exotic cerametallic friction material featuring a higher coefficient of friction. However, cerametallic material reduces pedal feel and results in more sudden clutch engagement, reducing street driveability. Mantic Stage 3 Clutch Kits feature cerametallic friction material on both sides of the clutch plate. This results in a strong torque capacity increase compared with Stage 2 - but reduced street driveability. Stage 3 kits include cushioned segments and a sprung hub to maintain a reasonable level of street drivability.

This kit includes : MANTIC Heavy Duty Cover Assembly, Full Cerametallic (SSCC) Clutch Plate For Increased Torque capacity featuring High Performance Engineered and Manufactured Friction Material, Release bearing, Clutch Alignment Tool, Spigot Bearing

Features and Specifications
  • Mantic Heavy Duty SGI Cover Assembly
  • Full Cerametallic Clutch Plate
  • Dual Mass Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB520
  • Alignment Tool: CAT120
  • Torque Capacity: Peak: 870Nm, Rated: 696Nm

    • Fitment:
  • Nissan Pulsar 2.0 Ltr Turbo, SR20DET N14 GTI-R, 8/90-12/94 1990-1994

    • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 225 mm x 20T x 22.4 mm, For Hyundai Santa Fe 2001-2005, 2.7 Ltr, G6BA, 138kw SM, 2/01-10/05, Kit

    PHC Clutch Clutch Kit, PHC Standard, 225 mm x 20T x 22.4 mm, For Hyundai Santa Fe 2001-2005, 2.7 Ltr, G6BA, 138kw SM, 2/01-10/05, Kit

    $1,012.96

    PHC Clutch Clutch Kit, PHC Standard, 275 mm x 14T x 32.4 mm, For Toyota Coaster 1993-1995, 4.2 Ltr Diesel, 1HZ Bus, HDB50, 9/93-4/95, Kit

    PHC Clutch Clutch Kit, PHC Standard, 275 mm x 14T x 32.4 mm, For Toyota Coaster 1993-1995, 4.2 Ltr Diesel, 1HZ Bus, HDB50, 9/93-4/95, Kit

    $323.77

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 10T x 35.0 mm, For BMW M3 2004-2005, 3.2 Ltr, S54326S4, 252kw E46, 6 Speed, 2/04-12/05, Kit

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 10T x 35.0 mm, For BMW M3 2004-2005, 3.2 Ltr, S54326S4, 252kw E46, 6 Speed, 2/04-12/05, Kit

    $2,467.00

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 23T x 24.2 mm, For Audi S3 1999-2002, 1.8 Ltr Turbo, APY, 154kw 3/99-4/02, Kit

    PHC Clutch Clutch Kit, PHC Standard, 240 mm x 23T x 24.2 mm, For Audi S3 1999-2002, 1.8 Ltr Turbo, APY, 154kw 3/99-4/02, Kit

    $397.50

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 200 mm x 24T x 25.4 mm, For Nissan 2000 1967-1970, SR311, 1/67-12/7, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 200 mm x 24T x 25.4 mm, For Nissan 2000 1967-1970, SR311, 1/67-12/7, Kit

    $376.10

    PHC Clutch Clutch Kit, PHC Standard, 215 mm x 10T x 29.0 mm, For Mercedes Benz 220 1968-1977, 2.2 Ltr Diesel, OM615.912, 44kw W115, 1/68-1/77, Kit

    PHC Clutch Clutch Kit, PHC Standard, 215 mm x 10T x 29.0 mm, For Mercedes Benz 220 1968-1977, 2.2 Ltr Diesel, OM615.912, 44kw W115, 1/68-1/77, Kit

    $481.79