Designed and manufactured to replace the clutch system installed as Original Equipment, a Mantic Stage 3 replacement clutch kit offers a strong torque capacity increase. Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 70 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, CI is the trusted source for a complete range of Clutch Kits suited to your vehicle. MANTIC STAGE SERIES COVER ASSEMBLY: Performance Clutch Systems for street use require increased torque capacity while retaining good pedal feel with fine modulation control. These characteristics inevitably increase heat which reduces service life. So the ideal performance clutch system for the street must also have improved heat dissipation. Mantic Stage 3 clutch kits feature a 20% increase (over original equipment) in clamp load for increased torque capacity. SPHEROIDAL GRAPHITE CASTINGS: Approximately 300% stronger than a standard casting this material (sometimes referred to as an Anti Burst casting) not only increases strength by up to 3 times, it also improves heat dispersion. BALANCED COVERS: To insure that the clutch system performs at maximum efficiency and that no unwanted vibration is generated as the cover spins, all Mantic Stage cover assemblies undergo a 2 stage balancing process. CERAMETALLIC FRICTION MATERIAL CLUTCH PLATE: The Torque Capacity of a Clutch Plate can be increased by using exotic cerametallic friction material featuring a higher coefficient of friction. However, cerametallic material reduces pedal feel and results in more sudden clutch engagement, reducing street driveability. Mantic Stage 3 Clutch Kits feature cerametallic friction material on both sides of the clutch plate. This results in a strong torque capacity increase compared with Stage 2 - but reduced street driveability. Stage 3 kits include cushioned segments and a sprung hub to maintain a reasonable level of street drivability.

This kit includes : MANTIC Heavy Duty Cover Assembly, Full Cerametallic (SSCC) Clutch Plate For Increased Torque capacity featuring High Performance Engineered and Manufactured Friction Material, Release bearing, Clutch Alignment Tool, Spigot Bearing

Features and Specifications
  • Mantic Heavy Duty SGI Cover Assembly
  • Full Cerametallic Clutch Plate
  • Dual Mass Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB520
  • Alignment Tool: CAT120
  • Torque Capacity: Peak: 870Nm, Rated: 696Nm

    • Fitment:
  • Nissan Cefiro 3.0 Ltr, VQ30DE, 164KW HA32, 8/94-11/98, New Zealand Only 1994-1998
  • Nissan Maxima 3.0 Ltr V6, VQ30DE A32, 1/95-12/99 1995-1999
  • Nissan Maxima 3.0 Ltr V6, VQ30DE, 166kw A33, 5 & 6 Speed, 1/00-12/03 2000-2003
  • Nissan Maxima 3.0 Ltr V6, VQ30DE J30, 1/91-12/94 1991-1994
  • Nissan Maxima 3.0 Ltr V6, VQ30E J30, 1/88-12/93 1988-1993
  • Nissan Maxima 3.0 Ltr V6 24V, VQ30DE J30, 1/95-12/99 1995-1999

    • More From This Category

    Hays Clutch Kit, Spring Hub, 10 Spline, 11 Disc Dia., 1-1/8 in. Input Shaft, 458 Horsepower, Organic, GM, Kit

    Hays Clutch Kit, Spring Hub, 10 Spline, 11 Disc Dia., 1-1/8 in. Input Shaft, 458 Horsepower, Organic, GM, Kit

    $1,109.45

    View
    PHC Clutch Clutch Kit, PHC Standard, 420 mm x 10T x 44.8 mm, For Volvo B10 Series Bus 1976-on, 9.6 Ltr TDI, TD100 Bus, B10M, 1/76-, Kit

    PHC Clutch Clutch Kit, PHC Standard, 420 mm x 10T x 44.8 mm, For Volvo B10 Series Bus 1976-on, 9.6 Ltr TDI, TD100 Bus, B10M, 1/76-, Kit

    $1,928.56

    View
    PHC Clutch Clutch Kit, PHC Standard, 300 mm x 12T x 28.0 mm, For Ford Trader 1995-1999, 4.6 Ltr Diesel 0811, 11/95-4/99, Kit

    PHC Clutch Clutch Kit, PHC Standard, 300 mm x 12T x 28.0 mm, For Ford Trader 1995-1999, 4.6 Ltr Diesel 0811, 11/95-4/99, Kit

    $826.63

    View
    PHC Clutch Clutch Kit, PHC Standard, 215 mm x 17T x 19.9 mm, For Saab 9000 1990-1993, 2.3 Ltr, B234I, 107kw 1/90-7/93, Kit

    PHC Clutch Clutch Kit, PHC Standard, 215 mm x 17T x 19.9 mm, For Saab 9000 1990-1993, 2.3 Ltr, B234I, 107kw 1/90-7/93, Kit

    $283.38

    View
    PHC Clutch Clutch Kit, PHC Standard, 303 mm x 10T x 32.0 mm, For Ford F Series 1998-2003, 4.2 Ltr Diesel, 6.07 TCA F250, 10/98-6/03, Kit

    PHC Clutch Clutch Kit, PHC Standard, 303 mm x 10T x 32.0 mm, For Ford F Series 1998-2003, 4.2 Ltr Diesel, 6.07 TCA F250, 10/98-6/03, Kit

    $865.89

    View
    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 28T x 22.1 mm, For Skoda Fabia 2007-2014, 1.4 Ltr, CGGB, 63kw 5J, 3/07-12/14, Kit

    PHC Clutch Clutch Kit, PHC Standard, 200 mm x 28T x 22.1 mm, For Skoda Fabia 2007-2014, 1.4 Ltr, CGGB, 63kw 5J, 3/07-12/14, Kit

    $258.20

    View