Designed and manufactured to replace the clutch system installed as Original Equipment, a Mantic Stage 1 replacement clutch kit offers a strong torque capacity increase. Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 70 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, CI is the trusted source for a complete range of Clutch Kits suited to your vehicle. PATENTED MANTIC STAGE SERIES COVER ASSEMBLY: Performance Clutch Systems for street use require increased torque capacity while retaining good pedal feel with fine modulation control. These characteristics inevitably increase heat which reduces service life. So the ideal performance clutch system for the street must also have improved heat dissipation. Mantic Stage cover assemblies are in themselves high clamp load covers providing increased clamping force as compared to standard product. Stage 1 kits also feature the Patented ER2 grooved cover which increase torque capacity while also improving heat dissipation. SPHEROIDAL GRAPHITE CASTINGS: Approximately 300% stronger than a standard casting this material (sometimes referred to as an Anti Burst casting) not only increases strength by up to 3 times, it also improves heat dispersion. BALANCED COVERS: To insure that the clutch system performs at maximum efficiency and that no unwanted vibration is generated as the cover spins, all Mantic Stage cover assemblies undergo a 2 stage balancing process.

This kit includes : MANTIC ER2 Heavy Duty Cover Assembly, Clutch plate, Release bearing, Clutch Alignment Tool, Spigot Bearing

Features and Specifications
  • Mantic Patented ER2 High Torque SGI Cover Assembly
  • Organic Clutch Plate
  • Dual Mass Flywheel: Not Included
  • Flywheel Step: 0.5
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Alignment Tool: CAT156
  • Torque Capacity: Peak: 416Nm, Rated: 332Nm

  • Fitment:
  • Holden Apollo 2.0 Ltr, 3S JK, 8/89-7/91 1989-1991
  • Holden Apollo 2.0 Ltr, 3S JL, 8/91-2/93 1991-1993
  • Toyota Camry-Vienta 2.0 Ltr, 2S SV11, 1/83-12/89 1983-1989
  • Toyota Camry-Vienta 1.8 Ltr, 1S SV20 Series I, 1/83-12/89 1983-1989
  • Toyota Camry-Vienta 2.0 Ltr DOHC, 3S SV20 Series I, 1/87-12/93 1987-1993
  • Toyota Camry-Vienta 2.0 Ltr DOHC, 3S SV20 Series II, 1/87-12/93 1987-1993
  • Toyota Camry-Vienta 2.0 Ltr DOHC, 3S SV21, 1/87-12/93 1987-1993
  • Toyota Camry-Vienta 2.0 Ltr DOHC, 3S SV22, 1/87-12/93 1987-1993
  • Toyota Celica 2.0 Ltr DOHC, 3SGE ST162, 1/86-5/90 1986-1990
  • Toyota Celica 2.0 Ltr DOHC, 3SFE ST162, 1/86-5/90 1986-1990
  • Toyota Celica 2.2 Ltr, 5SFE, 97kw ST184, 11/89-4/90 1989-1990
  • Toyota Corolla 1.8 Ltr Diesel, 1C-L CE80, 5/83-4/87 1983-1987
  • Toyota Corolla 1.8 Ltr Diesel, 1C CE96V, 1/87-12/91 1987-1991
  • Toyota Corona 1.8 Ltr DOHC, 4S-FI ST170, 12/87-11/89 1987-1989
  • Toyota Corona 2.0 Ltr DOHC EFI, 3S ST171, 12/87-5/90, New Zealand Model 1987-1990
  • Toyota Corona 2.0 Ltr DOHC, 3S-FC ST171, 12/87-5/90, New Zealand Model 1987-1990
  • Toyota MR2 2.0 Ltr, 3S-GE SW20, 3/90-6/90 1990-1990
  • Toyota Sprinter 1.8 Ltr Diesel, 1C-L CE80, 5/83-4/87 1983-1987
  • Toyota Sprinter 1.8 Ltr Diesel, 1C CE96V, 1/87-12/91 1987-1991
  • Toyota Camry-Vienta 2.0 Tdi, 2CT CV11R, 8/85-7/90, New Zealand Model 1985-1990
  • Toyota Camry-Vienta 2.0 Tdi, 2CT CV20R, 8/86-5/90, New Zealand Model 1986-1990
  • Toyota Camry-Vienta 2.0 Ltr, 3S-GELU, 118kw SV12R, 6/84-7/86, New Zealand Model 1984-1986
  • Toyota Carina 1.8 Ltr, 1S-ILU ST150R, 5/84-4/88 1984-1988
  • Toyota Carina 1.8 Ltr, 1S-ILU ST160R, 8/85-5/88 1985-1988
  • Toyota Carina 1.8 Ltr, 4S-FI ST163R, 5/88-8/89 1988-1989
  • Toyota Carina 1.8 Ltr, 4S-FI ST180R, 9/89-5/90 1989-1990
  • Toyota Carina 1.8 Ltr, 4S-FI ST181R, 9/89-5/90 1989-1990
  • Toyota Carina 2.0 Ltr Diesel, 2C, 54kw CT170R, 5/88-5/90 1988-1990
  • Toyota Carina 2.0 Ltr Diesel, 2C, 54kw CT176R, 5/88-5/90 1988-1990
  • Toyota Carina 2.0 Ltr, 3S-GELU, 118kw SR162R, 5 Speed, 8/85-8/89 1985-1989
  • Toyota Carina 2.0 Ltr, 3S-FE, 118kw SR162R, 5 Speed, 8/87-8/89 1987-1989
  • Toyota Carina 2.0 Ltr, 3S-FE, 92kw ST182R, 9/89-5/90 1989-1990
  • Toyota Carina 2.0 Ltr Twin Cam, 3S-GE, 123kw ST182R, 9/89-5/90 1989-1990
  • Toyota Carina 2.0 Ltr, 3S-FE, 92kw ST183R, 9/89-5/90 1989-1990
  • Toyota Carina 2.0 Ltr Twin Cam, 3S-GE, 123kw ST183R, 9/89-5/90 1989-1990
  • Toyota Celica 1.8 Ltr, 1S-iLU ST160R, 8/85-5/88 1985-1988
  • Toyota Celica 1.8 Ltr, 4S-FI ST163R, 5/88-8/89 1988-1989
  • Toyota Celica 2.0 Ltr, 3S-FE, 96kw ST182R, 10/89-7/90 1989-1990
  • Toyota Celica 2.0 Ltr, 3S-GE, 123kw ST182R, 10/89-9/93 1989-1993
  • Toyota Celica 2.0 Ltr, 3S-FE, 104kw ST182R, 8/90-9/93 1990-1993
  • Toyota Celica 2.0 Ltr, 3S-FE, 92kw ST183R, 10/89-4/90 1989-1990
  • Toyota Celica 2.0 Ltr, 3S-FE, 104kw ST183R, 8/90-9/93 1990-1993
  • Toyota Celica 2.0 Ltr, 3S-GE, 123kw ST183R, 10/89-4/90 1989-1990
  • Designed and manufactured to replace the clutch system installed as Original Equipment, a Mantic Stage 1 replacement clutch kit offers a strong torque capacity increase. Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 70 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, CI is the trusted source for a complete range of Clutch Kits suited to your vehicle. PATENTED MANTIC STAGE SERIES COVER ASSEMBLY: Performance Clutch Systems for street use require increased torque capacity while retaining good pedal feel with fine modulation control. These characteristics inevitably increase heat which reduces service life. So the ideal performance clutch system for the street must also have improved heat dissipation. Mantic Stage cover assemblies are in themselves high clamp load covers providing increased clamping force as compared to standard product. Stage 1 kits also feature the Patented ER2 grooved cover which increase torque capacity while also improving heat dissipation. SPHEROIDAL GRAPHITE CASTINGS: Approximately 300% stronger than a standard casting this material (sometimes referred to as an Anti Burst casting) not only increases strength by up to 3 times, it also improves heat dispersion. BALANCED COVERS: To insure that the clutch system performs at maximum efficiency and that no unwanted vibration is generated as the cover spins, all Mantic Stage cover assemblies undergo a 2 stage balancing process.

    This kit includes : MANTIC ER2 Heavy Duty Cover Assembly, Clutch plate, Release bearing, Clutch Alignment Tool, Spigot Bearing

    Features and Specifications
  • Mantic Patented ER2 High Torque SGI Cover Assembly
  • Organic Clutch Plate
  • Dual Mass Flywheel: Not Included
  • Flywheel Step: 0.5
  • Solid Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Alignment Tool: CAT156
  • Torque Capacity: Peak: 416Nm, Rated: 332Nm

  • Fitment:
  • Holden Apollo 2.0 Ltr, 3S JK, 8/89-7/91 1989-1991
  • Holden Apollo 2.0 Ltr, 3S JL, 8/91-2/93 1991-1993
  • Toyota Camry-Vienta 2.0 Ltr, 2S SV11, 1/83-12/89 1983-1989
  • Toyota Camry-Vienta 1.8 Ltr, 1S SV20 Series I, 1/83-12/89 1983-1989
  • Toyota Camry-Vienta 2.0 Ltr DOHC, 3S SV20 Series I, 1/87-12/93 1987-1993
  • Toyota Camry-Vienta 2.0 Ltr DOHC, 3S SV20 Series II, 1/87-12/93 1987-1993
  • Toyota Camry-Vienta 2.0 Ltr DOHC, 3S SV21, 1/87-12/93 1987-1993
  • Toyota Camry-Vienta 2.0 Ltr DOHC, 3S SV22, 1/87-12/93 1987-1993
  • Toyota Celica 2.0 Ltr DOHC, 3SGE ST162, 1/86-5/90 1986-1990
  • Toyota Celica 2.0 Ltr DOHC, 3SFE ST162, 1/86-5/90 1986-1990
  • Toyota Celica 2.2 Ltr, 5SFE, 97kw ST184, 11/89-4/90 1989-1990
  • Toyota Corolla 1.8 Ltr Diesel, 1C-L CE80, 5/83-4/87 1983-1987
  • Toyota Corolla 1.8 Ltr Diesel, 1C CE96V, 1/87-12/91 1987-1991
  • Toyota Corona 1.8 Ltr DOHC, 4S-FI ST170, 12/87-11/89 1987-1989
  • Toyota Corona 2.0 Ltr DOHC EFI, 3S ST171, 12/87-5/90, New Zealand Model 1987-1990
  • Toyota Corona 2.0 Ltr DOHC, 3S-FC ST171, 12/87-5/90, New Zealand Model 1987-1990
  • Toyota MR2 2.0 Ltr, 3S-GE SW20, 3/90-6/90 1990-1990
  • Toyota Sprinter 1.8 Ltr Diesel, 1C-L CE80, 5/83-4/87 1983-1987
  • Toyota Sprinter 1.8 Ltr Diesel, 1C CE96V, 1/87-12/91 1987-1991
  • Toyota Camry-Vienta 2.0 Tdi, 2CT CV11R, 8/85-7/90, New Zealand Model 1985-1990
  • Toyota Camry-Vienta 2.0 Tdi, 2CT CV20R, 8/86-5/90, New Zealand Model 1986-1990
  • Toyota Camry-Vienta 2.0 Ltr, 3S-GELU, 118kw SV12R, 6/84-7/86, New Zealand Model 1984-1986
  • Toyota Carina 1.8 Ltr, 1S-ILU ST150R, 5/84-4/88 1984-1988
  • Toyota Carina 1.8 Ltr, 1S-ILU ST160R, 8/85-5/88 1985-1988
  • Toyota Carina 1.8 Ltr, 4S-FI ST163R, 5/88-8/89 1988-1989
  • Toyota Carina 1.8 Ltr, 4S-FI ST180R, 9/89-5/90 1989-1990
  • Toyota Carina 1.8 Ltr, 4S-FI ST181R, 9/89-5/90 1989-1990
  • Toyota Carina 2.0 Ltr Diesel, 2C, 54kw CT170R, 5/88-5/90 1988-1990
  • Toyota Carina 2.0 Ltr Diesel, 2C, 54kw CT176R, 5/88-5/90 1988-1990
  • Toyota Carina 2.0 Ltr, 3S-GELU, 118kw SR162R, 5 Speed, 8/85-8/89 1985-1989
  • Toyota Carina 2.0 Ltr, 3S-FE, 118kw SR162R, 5 Speed, 8/87-8/89 1987-1989
  • Toyota Carina 2.0 Ltr, 3S-FE, 92kw ST182R, 9/89-5/90 1989-1990
  • Toyota Carina 2.0 Ltr Twin Cam, 3S-GE, 123kw ST182R, 9/89-5/90 1989-1990
  • Toyota Carina 2.0 Ltr, 3S-FE, 92kw ST183R, 9/89-5/90 1989-1990
  • Toyota Carina 2.0 Ltr Twin Cam, 3S-GE, 123kw ST183R, 9/89-5/90 1989-1990
  • Toyota Celica 1.8 Ltr, 1S-iLU ST160R, 8/85-5/88 1985-1988
  • Toyota Celica 1.8 Ltr, 4S-FI ST163R, 5/88-8/89 1988-1989
  • Toyota Celica 2.0 Ltr, 3S-FE, 96kw ST182R, 10/89-7/90 1989-1990
  • Toyota Celica 2.0 Ltr, 3S-GE, 123kw ST182R, 10/89-9/93 1989-1993
  • Toyota Celica 2.0 Ltr, 3S-FE, 104kw ST182R, 8/90-9/93 1990-1993
  • Toyota Celica 2.0 Ltr, 3S-FE, 92kw ST183R, 10/89-4/90 1989-1990
  • Toyota Celica 2.0 Ltr, 3S-FE, 104kw ST183R, 8/90-9/93 1990-1993
  • Toyota Celica 2.0 Ltr, 3S-GE, 123kw ST183R, 10/89-4/90 1989-1990