Designed and manufactured to replace the clutch system installed as Original Equipment, a Mantic Stage 1 replacement clutch kit offers a strong torque capacity increase. Each component has been thoroughly tested and developed for a specific application. This range provides a Quality Assured replacement part that will meet or exceed the requirements of the original unit. After 70 years of experience in developing and manufacturing clutch kits for OEM and Aftermarket use, CI is the trusted source for a complete range of Clutch Kits suited to your vehicle. PATENTED MANTIC STAGE SERIES COVER ASSEMBLY: Performance Clutch Systems for street use require increased torque capacity while retaining good pedal feel with fine modulation control. These characteristics inevitably increase heat which reduces service life. So the ideal performance clutch system for the street must also have improved heat dissipation. Mantic Stage cover assemblies are in themselves high clamp load covers providing increased clamping force as compared to standard product. Stage 1 kits also feature the Patented ER2 grooved cover which increase torque capacity while also improving heat dissipation. SPHEROIDAL GRAPHITE CASTINGS: Approximately 300% stronger than a standard casting this material (sometimes referred to as an Anti Burst casting) not only increases strength by up to 3 times, it also improves heat dispersion. BALANCED COVERS: To insure that the clutch system performs at maximum efficiency and that no unwanted vibration is generated as the cover spins, all Mantic Stage cover assemblies undergo a 2 stage balancing process.

This kit includes : MANTIC ER2 Heavy Duty Cover Assembly, Clutch plate, Release bearing, Clutch Alignment Tool, Spigot Bearing

Features and Specifications
  • Mantic Patented ER2 High Torque SGI Cover Assembly
  • Organic Clutch Plate
  • Dual Mass Flywheel: Not Included
  • Concentric Slave Cylinder: Not Included
  • Spigot: RSB509
  • Alignment Tool: CAT129
  • Torque Capacity: Peak: 475Nm, Rated: 380Nm

  • Fitment:
  • Mitsubishi 3000GT 3.0 Ltr, V6 6G72 2WD, 4/90-12/99 1990-1999
  • Mitsubishi Chariot 2.0 Ltr Turbo, 4G63T N43W, 5/95-9/97, New Zealand Model 1995-1997
  • Mitsubishi Diamante 3.0 Ltr, V6 6G72 F17A, 5/90-1/95 1990-1995
  • Mitsubishi Diamante 2.5 Ltr, V6 6G73 F31A, 1/95-9/02 1995-2002
  • Mitsubishi FTO 2.0 Ltr EFI, V6 6A12 DE3A, 9/94-12/00 1994-2000
  • Mitsubishi Galant 2.0 Ltr 16V Turbo, 4G63T HH (VR4), 9/90-3/93 1990-1993
  • Mitsubishi GTO 3.0 Ltr Turbo, V6 6G72 Z16A, 1/90-12/94 1990-1994
  • Mitsubishi Lancer 1.8 Ltr Turbo, 4G93T CC (GSR), 9/92-3/95 1992-1995
  • Mitsubishi Lancer 2.0 Ltr Turbo, 4G63T CD (GSR), 4/95-5/97 1995-1997
  • Mitsubishi Lancer 2.0 Ltr Turbo, 4G63 CD9A (EVO I), 10/92-4/93 1992-1993
  • Mitsubishi Lancer 2.0 Ltr Turbo, 4G63 CD9A (EVO II), 5/93-11/93 1993-1993
  • Mitsubishi Lancer 2.0 Ltr Turbo, 4G63 CE9A (EVO III), 12/93-7/97 1993-1997
  • Mitsubishi Legnum 2.5 Ltr, 6A13, 130KW EC5W, 8/96-7/98 1996-1998
  • Mitsubishi Libero 1.8 Ltr Turbo, 4G93T, 160kw CD5W, 1/94-3/00, New Zealand Model 1994-2000
  • Mitsubishi Magna 3.0 Ltr V6, 6G72 TR, 4/91-3/94 1991-1994
  • Mitsubishi Magna 3.0 Ltr V6, 6G72 TS, 4/94-12/96 1994-1996
  • More From This Category

    PHC Clutch Clutch Kit, PHC Standard, 260 mm x 23T x 26.2 mm, LDV V80 2013-on, 2.5 Ltr TDI, SC25R136Q4, 100kw Van, 5 Speed, 1/13-, Kit

    PHC Clutch Clutch Kit, PHC Standard, 260 mm x 23T x 26.2 mm, LDV V80 2013-on, 2.5 Ltr TDI, SC25R136Q4, 100kw Van, 5 Speed, 1/13-, Kit

    $489.29

    PHC Clutch Clutch Kit, PHC Standard, 280 mm x 10T x 29.0 mm, Iveco Daily 2005-2007, 3.0 Ltr TDI, F1CE0481 (HPT), 122kw 50C17, 6S-380A OD, 5/05-4/07, A

    PHC Clutch Clutch Kit, PHC Standard, 280 mm x 10T x 29.0 mm, Iveco Daily 2005-2007, 3.0 Ltr TDI, F1CE0481 (HPT), 122kw 50C17, 6S-380A OD, 5/05-4/07, A

    $1,650.25

    PHC Clutch Clutch Kit, PHC Standard, 220 mm x 10T x 29.0 mm, For Holden Torana 1979-1980, 6 Cyl, Red Motor UC, Pull Type Fork, 10/79-12/8, Kit

    PHC Clutch Clutch Kit, PHC Standard, 220 mm x 10T x 29.0 mm, For Holden Torana 1979-1980, 6 Cyl, Red Motor UC, Pull Type Fork, 10/79-12/8, Kit

    $327.50

    PHC Clutch Clutch Kit, PHC Standard, 236 mm x 23T x 26.5 mm, For Toyota Rav 4 2013-2019, 2.0 Ltr DOHC, 3ZR-FE, 107kw ZSA42, 6 Speed, 2/13-2/19, Kit

    PHC Clutch Clutch Kit, PHC Standard, 236 mm x 23T x 26.5 mm, For Toyota Rav 4 2013-2019, 2.0 Ltr DOHC, 3ZR-FE, 107kw ZSA42, 6 Speed, 2/13-2/19, Kit

    $797.04

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 225 mm x 21T x 29.0 mm, For Suzuki Grand Vitara 1998-2003, 2.5 Ltr V6, H25A SQ625, 1/98-8/03, Kit

    PHC Clutch Clutch Kit, PHC Heavy Duty, Upgrade, 225 mm x 21T x 29.0 mm, For Suzuki Grand Vitara 1998-2003, 2.5 Ltr V6, H25A SQ625, 1/98-8/03, Kit

    $289.12