DASH OVERVIEW

With a crisp, clear and full-color display, the all-new Haltech uC-10 Display Dash is now available.

The uC-10 is compatible with Haltech CAN, OBD2, and selected aftermarket ECU brands. It can also be wired in as a complete stand-alone unit. This versatility ensures that it can seamlessly integrate into a wide range of vehicles and setups.

The uC-10 offers plenty of scope for sensors and other inputs in a stand-alone configuration or for use as an I/O expander in a Haltech environment.

  • Full-colour, optically-bonded TFT screen
  • 70° minimum viewing angle (vertical and horizontal)
  • 1280 x 480 resolution, 600+ lumens
  • IP64 (Dust-tight and protected against water splashes)
  • 6-digit odometer
  • 512MB of on-board looped data logging
  • NSP compatible
  • 10 x user configurable AVIP's
  • 4 x user configurable DPO's
  • 4 x user configurable SPI's
  • 1 x dedicated Tacho Input
  • 1 x dedicated alternator excite
  • 2 x Ambient light sensors

All current Haltech ECUs via CAN. Also Plug'n'Play compatible with the following aftermarket ECU brands: Hondata, Link G4, MaxxECU, Microtech, MoTeC M1 series, MoTeC hundred series- (M400,600,800 gold box ECUs), Syvecs.

Includes: 1 x Haltech uC-10 Digital Dash, 1 x 34P connector - same as HT-131001, 1 x Haltech DTM4 to DTM4 CAN cable 3.0m (118in), 1 x USB-C cable, 3 x M5 x 8mm mounting screws, 2 x Momentary switches, pre-terminated 800mm 22AWG Cable, 1 x Glass Mount Wi-Fi antenna (Wi-Fi functionality will be made available with future firmware update), 1 x Haltech fabric keytag, Quick Start Guide, Haltech stickers.

More From This Category

Haltech Outputs and Ignition Systems, Ignition Coils, Plug and Pins Only - Delphi 3 Pin Single Row Flat Coil Connector, Each

Haltech Outputs and Ignition Systems, Ignition Coils, Plug and Pins Only - Delphi 3 Pin Single Row Flat Coil Connector, Each

$20.00

Haltech Inputs and CAN Expansion Products, Air Temp Sensors, Weld Fitting - Aluminum Thread: 3/8 NPT 18TPI, Each

Haltech Inputs and CAN Expansion Products, Air Temp Sensors, Weld Fitting - Aluminum Thread: 3/8 NPT 18TPI, Each

$15.00

Haltech Elite 1500 ECU + Mazda 13B S6-8 CAS with Flying Lead Ignition Terminated Harness Kit Injector Connector: Bosch EV1, Kit

Haltech Elite 1500 ECU + Mazda 13B S6-8 CAS with Flying Lead Ignition Terminated Harness Kit Injector Connector: Bosch EV1, Kit

$3,576.00

Haltech ECU + Universal Wiring Kits, Nexus R3, Nexus R3 + Universal Wire-in Harness Kit Length: 2.5m (8'), Kit

Haltech ECU + Universal Wiring Kits, Nexus R3, Nexus R3 + Universal Wire-in Harness Kit Length: 2.5m (8'), Kit

$3,997.00

Haltech Inputs and CAN Expansion, CAN Adaptors Hubs and Cables, Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 900mm (36"), Each

Haltech Inputs and CAN Expansion, CAN Adaptors Hubs and Cables, Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 900mm (36"), Each

$59.00

Haltech Inputs and CAN Expansion Products, Trim Modules, Triple Switch Panel Kit

Haltech Inputs and CAN Expansion Products, Trim Modules, Triple Switch Panel Kit

$399.00