DASH OVERVIEW

With a crisp, clear and full-color display, the all-new Haltech uC-10 Display Dash is now available.

The uC-10 is compatible with Haltech CAN, OBD2, and selected aftermarket ECU brands. It can also be wired in as a complete stand-alone unit. This versatility ensures that it can seamlessly integrate into a wide range of vehicles and setups.

The uC-10 offers plenty of scope for sensors and other inputs in a stand-alone configuration or for use as an I/O expander in a Haltech environment.

  • Full-colour, optically-bonded TFT screen
  • 70° minimum viewing angle (vertical and horizontal)
  • 1280 x 480 resolution, 600+ lumens
  • IP64 (Dust-tight and protected against water splashes)
  • 6-digit odometer
  • 512MB of on-board looped data logging
  • NSP compatible
  • 10 x user configurable AVIP's
  • 4 x user configurable DPO's
  • 4 x user configurable SPI's
  • 1 x dedicated Tacho Input
  • 1 x dedicated alternator excite
  • 2 x Ambient light sensors

All current Haltech ECUs via CAN. Also Plug'n'Play compatible with the following aftermarket ECU brands: Hondata, Link G4, MaxxECU, Microtech, MoTeC M1 series, MoTeC hundred series- (M400,600,800 gold box ECUs), Syvecs.

Includes: 1 x Haltech uC-10 Digital Dash, 1 x 34P connector - same as HT-131001, 1 x Haltech DTM4 to DTM4 CAN cable 3.0m (118in), 1 x USB-C cable, 3 x M5 x 8mm mounting screws, 2 x Momentary switches, pre-terminated 800mm 22AWG Cable, 1 x Glass Mount Wi-Fi antenna (Wi-Fi functionality will be made available with future firmware update), 1 x Haltech fabric keytag, Quick Start Guide, Haltech stickers.

More From This Category

Haltech Inputs and CAN Expansion, CAN Adaptors Hubs and Cables, Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 900mm (36"), Each

Haltech Inputs and CAN Expansion, CAN Adaptors Hubs and Cables, Haltech CAN Cable 8 pin Black Tyco to 8 pin Black Tyco Length: 900mm (36"), Each

$59.00

Haltech Wiring and Connectivity, Engine and Sensor Plugs and Pins, Plug and Pins Only - Matching Set of Deutsch DTM-8 Connectors (7.5 Amp), Each

Haltech Wiring and Connectivity, Engine and Sensor Plugs and Pins, Plug and Pins Only - Matching Set of Deutsch DTM-8 Connectors (7.5 Amp), Each

$35.00

Haltech Wiring Harnesses, Elite ECU Plug'n'Play, Elite 1000/1500 Nissan Silvia S13 and 180SX (SR20DET) Plug 'n' Play Adaptor Harness, Kit

Haltech Wiring Harnesses, Elite ECU Plug'n'Play, Elite 1000/1500 Nissan Silvia S13 and 180SX (SR20DET) Plug 'n' Play Adaptor Harness, Kit

$699.00

Haltech Inputs and CAN Expansion Products, Trim Modules, Dual Switch Panel Only, Each

Haltech Inputs and CAN Expansion Products, Trim Modules, Dual Switch Panel Only, Each

$59.00

Haltech Tuning Tools, Harness Sleeve Pack, Each

Haltech Tuning Tools, Harness Sleeve Pack, Each

$55.00

Haltech GM Gen III V8 (LS1/LS6) Terminated Engine Harness Kits, Nexus R5 LSx Non DBW Terminated Harness Injector Connector: EV1, Kit

Haltech GM Gen III V8 (LS1/LS6) Terminated Engine Harness Kits, Nexus R5 LSx Non DBW Terminated Harness Injector Connector: EV1, Kit

$1,965.00