DASH OVERVIEW

With a crisp, clear and full-color display, the all-new Haltech uC-10 Display Dash is now available.

The uC-10 is compatible with Haltech CAN, OBD2, and selected aftermarket ECU brands. It can also be wired in as a complete stand-alone unit. This versatility ensures that it can seamlessly integrate into a wide range of vehicles and setups.

The uC-10 offers plenty of scope for sensors and other inputs in a stand-alone configuration or for use as an I/O expander in a Haltech environment.

  • Full-colour, optically-bonded TFT screen
  • 70° minimum viewing angle (vertical and horizontal)
  • 1280 x 480 resolution, 600+ lumens
  • IP64 (Dust-tight and protected against water splashes)
  • 6-digit odometer
  • 512MB of on-board looped data logging
  • NSP compatible
  • 10 x user configurable AVIP's
  • 4 x user configurable DPO's
  • 4 x user configurable SPI's
  • 1 x dedicated Tacho Input
  • 1 x dedicated alternator excite
  • 2 x Ambient light sensors

All current Haltech ECUs via CAN. Also Plug'n'Play compatible with the following aftermarket ECU brands: Hondata, Link G4, MaxxECU, Microtech, MoTeC M1 series, MoTeC hundred series- (M400,600,800 gold box ECUs), Syvecs.

Includes: 1 x Haltech uC-10 Digital Dash, 1 x 34P connector - same as HT-131001, 1 x Haltech DTM4 to DTM4 CAN cable 3.0m (118in), 1 x USB-C cable, 3 x M5 x 8mm mounting screws, 2 x Momentary switches, pre-terminated 800mm 22AWG Cable, 1 x Glass Mount Wi-Fi antenna (Wi-Fi functionality will be made available with future firmware update), 1 x Haltech fabric keytag, Quick Start Guide, Haltech stickers.

More From This Category

Haltech Wiring and Connectivity, Engine and Sensor Plugs and Pins, Plug and Pins Only - Matching Set of Deutsch DTM-12 Connectors (7.5 Amp), Each

Haltech Wiring and Connectivity, Engine and Sensor Plugs and Pins, Plug and Pins Only - Matching Set of Deutsch DTM-12 Connectors (7.5 Amp), Each

$35.00

Haltech Inputs and CAN Expansion Products, O2 Wideband Controllers & Accessories, O2 Sensor weld-on bung - 303 Stainless Steel Thread: M18 x1.5, Each

Haltech Inputs and CAN Expansion Products, O2 Wideband Controllers & Accessories, O2 Sensor weld-on bung - 303 Stainless Steel Thread: M18 x1.5, Each

$20.00

Haltech Inputs and CAN Expansion Products,  WB2 Bosch - Dual Channel CAN O2 Wideband Controller Kit Length: 1.2M (4ft), Kit

Haltech Inputs and CAN Expansion Products, WB2 Bosch - Dual Channel CAN O2 Wideband Controller Kit Length: 1.2M (4ft), Kit

$749.00

Haltech Outputs and Ignition Systems, Boost Control, Turbosmart GenV eWG60 Powergate 60 Diameter: 60mm, Kit

Haltech Outputs and Ignition Systems, Boost Control, Turbosmart GenV eWG60 Powergate 60 Diameter: 60mm, Kit

$1,649.94

Haltech Inputs and CAN Expansion Products, Fluid Temp Sensors, Weld Fitting - Aluminum Thread: M12 x 1.5, Each

Haltech Inputs and CAN Expansion Products, Fluid Temp Sensors, Weld Fitting - Aluminum Thread: M12 x 1.5, Each

$15.00

Haltech Elite ECU Terminated Engine Harnesses, V8 GM/Chrysler Hemi Small/Big Block 8 x Individual High Output IGN-1A Inductive Coil and Harness Kit

Haltech Elite ECU Terminated Engine Harnesses, V8 GM/Chrysler Hemi Small/Big Block 8 x Individual High Output IGN-1A Inductive Coil and Harness Kit

$1,551.00