RTS clutch alignment tools are a must have when installing your clutch kit. The purpose of it is to mimic the input shaft of your gearbox. This will then line up the clutch disc perfectly in relation to the spigot bearing and make fitting the gearbox much quicker and easier.

More From This Category

COMP Cams Pushrod, Magnum, Chromoly, Heat-Treated 6.400 in. Long, .080 in. Wall, 5/16 in. Diameter, Each

COMP Cams Pushrod, Magnum, Chromoly, Heat-Treated 6.400 in. Long, .080 in. Wall, 5/16 in. Diameter, Each

$19.04

COMP Cams Pushrod, Straight Tube, Chromoly, Ball Tips, 8.950 in. Long, .165 in. Wall, 7/16 in. Diameter, Set of 16

COMP Cams Pushrod, Straight Tube, Chromoly, Ball Tips, 8.950 in. Long, .165 in. Wall, 7/16 in. Diameter, Set of 16

$511.41

COMP Cams Pushrod, Hi-Tech, Chromoly, Heat-Treated, 7.100 in. Long, .080 in. Wall, 5/16 in. Diameter, Each

COMP Cams Pushrod, Hi-Tech, Chromoly, Heat-Treated, 7.100 in. Long, .080 in. Wall, 5/16 in. Diameter, Each

$23.91

COMP Cams Pushrod, Hi-Tech, Chromoly, Heat-Treated, 10.900 in. Long, .080 in. Wall, 3/8 in. Diameter, Set of 16

COMP Cams Pushrod, Hi-Tech, Chromoly, Heat-Treated, 10.900 in. Long, .080 in. Wall, 3/8 in. Diameter, Set of 16

$503.06