Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.

More From This Category

COMP Cams Valve SpringNLA - use 26987-16

COMP Cams Valve SpringNLA - use 26987-16

$247.45

COMP Cams Engine Valve Spring Seat, ID Spring Locator, 1.550 in. OD, .570 in. ID, .060 in. Thick, Set of 16

COMP Cams Engine Valve Spring Seat, ID Spring Locator, 1.550 in. OD, .570 in. ID, .060 in. Thick, Set of 16

$121.03

BBC Steel 10 degree Retainer 1.500 OD x 1.168 ID x .844 ID, Set of 16

BBC Steel 10 degree Retainer 1.500 OD x 1.168 ID x .844 ID, Set of 16

$119.89

Trick Flow Valve Springs, Dual, Nano Peened Double Platinum, 160 lbs. Seat Pressure. 425 lbs. Open at .670 Lift. LS1, LS6, LS2, LS3, LQ4, LQ9, L92, Se

Trick Flow Valve Springs, Dual, Nano Peened Double Platinum, 160 lbs. Seat Pressure. 425 lbs. Open at .670 Lift. LS1, LS6, LS2, LS3, LQ4, LQ9, L92, Se

$353.80

COMP Cams Valve Seal, Metal Body Viton, .530 in. Guide Size, 5/16 in. Valve Stem, Set of 12

COMP Cams Valve Seal, Metal Body Viton, .530 in. Guide Size, 5/16 in. Valve Stem, Set of 12

$31.43