Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.

More From This Category

Sonnax Shim, GM, Th350, Th350C, 4L60, 4L60/70-E

Sonnax Shim, GM, Th350, Th350C, 4L60, 4L60/70-E

$13.22

COMP Cams Valve Spring Shim, Steel, Hardened, 1.500 in. OD, .645 in. ID .030 in. Thick, Set of 16

COMP Cams Valve Spring Shim, Steel, Hardened, 1.500 in. OD, .645 in. ID .030 in. Thick, Set of 16

$25.76

MANLEY Valve Spring, 1.100 in. OD, 950 lbs./in. Rate, 0.95 in. Coil Bind Height, For Nissan Patrol TB48, Set of 24

MANLEY Valve Spring, 1.100 in. OD, 950 lbs./in. Rate, 0.95 in. Coil Bind Height, For Nissan Patrol TB48, Set of 24

$333.08

COMP Cams Valve Seal, PTFE, .500 in. Guide Size, 5/16 in. Valve Stem, Set of 12

COMP Cams Valve Seal, PTFE, .500 in. Guide Size, 5/16 in. Valve Stem, Set of 12

$60.13

AFR Valve Guide, BBC/BBF 24° 11/32 Exhaust (2017 - Present), Ea.

AFR Valve Guide, BBC/BBF 24° 11/32 Exhaust (2017 - Present), Ea.

$30.61