Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.

More From This Category

AFR SB Ford/LS1 Intake Seat 2.130 OD x 1.680 ID x .375”

AFR SB Ford/LS1 Intake Seat 2.130 OD x 1.680 ID x .375”

$19.98

Trick Flow Valve Spring, PAC Racing, Single, 1.488 in. Outside Diameter, 358 lbs./in. Rate, 1.040 in. Coil Bind, Each

Trick Flow Valve Spring, PAC Racing, Single, 1.488 in. Outside Diameter, 358 lbs./in. Rate, 1.040 in. Coil Bind, Each

$21.46

MANLEY Valve Spring Shims, Hardened, Steel, 1.437 O.D, .060 in. Thick, Set of 50

MANLEY Valve Spring Shims, Hardened, Steel, 1.437 O.D, .060 in. Thick, Set of 50

$69.69

MANLEY Valve Lock, 10 Degree Machined, Bead Loc, PVC Titanium, +.050 .3415 in. Stem, Each

MANLEY Valve Lock, 10 Degree Machined, Bead Loc, PVC Titanium, +.050 .3415 in. Stem, Each

$39.30

MANLEY Valve Lock, 10 Degree Machined, Bead Loc, Steel, .3415 in. Stem, Each

MANLEY Valve Lock, 10 Degree Machined, Bead Loc, Steel, .3415 in. Stem, Each

$9.68