Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.

More From This Category

COMP Cams Valve Spring, Dual, 1.625 in. O.D, 630 lbs./in. Rate, 1.090 in. Coil Bind Height, Set of 16

COMP Cams Valve Spring, Dual, 1.625 in. O.D, 630 lbs./in. Rate, 1.090 in. Coil Bind Height, Set of 16

$995.19

COMP Cams Valve Spring, Beehive Style, 1.310 in. OD, 1.800 in. Installed Height, 372 lbs./in. Rate, Set of 16s

COMP Cams Valve Spring, Beehive Style, 1.310 in. OD, 1.800 in. Installed Height, 372 lbs./in. Rate, Set of 16s

$554.80

COMP Cams Engine Valve Spring Seat, ID Spring Locator, 1.660 in. OD, .570 in. ID, .060 in. Thick, Each

COMP Cams Engine Valve Spring Seat, ID Spring Locator, 1.660 in. OD, .570 in. ID, .060 in. Thick, Each

$10.36

MANLEY Valve Spring Retainer, Titanium, Super 7 Degree, 1.550 in. OD, Double, Lightweight, Each

MANLEY Valve Spring Retainer, Titanium, Super 7 Degree, 1.550 in. OD, Double, Lightweight, Each

$55.61

MANLEY Valve Lock, 10 Degree Machined, Conventional, Steel, +.050 .3110 in. Stem, Each

MANLEY Valve Lock, 10 Degree Machined, Conventional, Steel, +.050 .3110 in. Stem, Each

$9.68

COMP Cams Valve Spring Shim, Steel, Hardened, 1.480 in. OD, .765 in. ID .030 in. Thick, Each

COMP Cams Valve Spring Shim, Steel, Hardened, 1.480 in. OD, .765 in. ID .030 in. Thick, Each

$1.29