Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.

More From This Category

MANLEY Lash Cap, TensileMax, .3415 in. Valve Stem, .080 in. Thick, Set of 16

MANLEY Lash Cap, TensileMax, .3415 in. Valve Stem, .080 in. Thick, Set of 16

$525.75

COMP Cams Valve Lock, Titanium, 10 Degree, 5/16 in, Single Groove, w/ Lash Cap Recess, Set of 12

COMP Cams Valve Lock, Titanium, 10 Degree, 5/16 in, Single Groove, w/ Lash Cap Recess, Set of 12

$417.93

MANLEY Valve Spring Retainer, 10 Degree, +.100 in, H-13, 1.550 in. OD, Double, Each

MANLEY Valve Spring Retainer, 10 Degree, +.100 in, H-13, 1.550 in. OD, Double, Each

$35.12

Trick Flow Valve Springs, PAC Racing, Beehive, .873 in./1.061 in. O.D, 308 lbs./in. Rate, .960 in. Coil Bind, Set of 32

Trick Flow Valve Springs, PAC Racing, Beehive, .873 in./1.061 in. O.D, 308 lbs./in. Rate, .960 in. Coil Bind, Set of 32

$1,247.00

MANLEY Valve Lock, 10 Degree Machined, Conventional, Titanium, .3110 in. Stem, Each

MANLEY Valve Lock, 10 Degree Machined, Conventional, Titanium, .3110 in. Stem, Each

$25.85