Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.

More From This Category

MANLEY Valve Spring Shims, Hardened, Steel, 1.500 O.D, .015 in. Thick, Set of 50

MANLEY Valve Spring Shims, Hardened, Steel, 1.500 O.D, .015 in. Thick, Set of 50

$132.06

MANLEY Valve Stem Seal, 11/32 in. Stem, .500 in. Guide OD, Set of 8

MANLEY Valve Stem Seal, 11/32 in. Stem, .500 in. Guide OD, Set of 8

$32.40

Trick Flow Valve Springs, Single, 1.250 in. Outside Diameter, 380 lbs./in. Rate, 1.180 in. Coil Bind, Set of 16

Trick Flow Valve Springs, Single, 1.250 in. Outside Diameter, 380 lbs./in. Rate, 1.180 in. Coil Bind, Set of 16

$129.34

MANLEY Valve Spring, Street Master, Chrome Silicon, 1.250 in. OD, 357 lbs./in. Rate, 1.180 in. Coil Bind Height, Single, Set of 16

MANLEY Valve Spring, Street Master, Chrome Silicon, 1.250 in. OD, 357 lbs./in. Rate, 1.180 in. Coil Bind Height, Single, Set of 16

$234.55

COMP Cams Valve Lock, Steel, 10 Degree, 11/32 in, Single Groove, w/ Lash Cap Recess, -.050 in, Height, Set of 12

COMP Cams Valve Lock, Steel, 10 Degree, 11/32 in, Single Groove, w/ Lash Cap Recess, -.050 in, Height, Set of 12

$59.37

MANLEY Valve Lock, 10 Degree Machined, Bead Loc, Steel, 7mm Stem, Set of 8

MANLEY Valve Lock, 10 Degree Machined, Bead Loc, Steel, 7mm Stem, Set of 8

$77.39