Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.

More From This Category

COMP Cams Valve Lock, Steel, 10 Degree, 11/32 in, Single Groove, w/o Lash Cap Recess, +.050 in, Height, Set of 8

COMP Cams Valve Lock, Steel, 10 Degree, 11/32 in, Single Groove, w/o Lash Cap Recess, +.050 in, Height, Set of 8

$28.13

Trick Flow Valve Springs, PAC Racing, Single, 1.244 in. Outside Diameter, 450 lbs./in. Rate, 1.150 in. Coil Bind, Pair

Trick Flow Valve Springs, PAC Racing, Single, 1.244 in. Outside Diameter, 450 lbs./in. Rate, 1.150 in. Coil Bind, Pair

$63.80

AFR Valve Seat, +.010 SBC OVERSIZE INTAKE

AFR Valve Seat, +.010 SBC OVERSIZE INTAKE

$25.04

MANLEY Valve Spring Retainer, Steel, Super 7 Degree, H-13, 1.570 in. OD, Double, Set of 16

MANLEY Valve Spring Retainer, Steel, Super 7 Degree, H-13, 1.570 in. OD, Double, Set of 16

$561.39

AFR Spring Cup, O.D. 1.655 OD x 1.565 ID x .570 ID (Fits 8000, 8001, 8002, 8016 for BBC/BBF), Ea.

AFR Spring Cup, O.D. 1.655 OD x 1.565 ID x .570 ID (Fits 8000, 8001, 8002, 8016 for BBC/BBF), Ea.

$11.13

MANLEY Valve Spring Locator, Inside, Heat-Treated, Fits 1.311 in. OD. Spring, .505 in. ID, 1.290 in. OD, .062 in. Thick, Black, Each

MANLEY Valve Spring Locator, Inside, Heat-Treated, Fits 1.311 in. OD. Spring, .505 in. ID, 1.290 in. OD, .062 in. Thick, Black, Each

$11.77