Suits: Plug 'n' Play replacement of the factory ECU for Yamaha WaveRunnerFX, FZS, FZR (2008-2014)

Includes: Molded polyurethane plug 'n' play adaptor harness, mounting bracket and waterproof CAN USB extension.

Notes: OEM Functionality Not Supported-Instrument Cluster and Immobilizer


OVERVIEW

If you are using a factory harness and are after an easy ECU upgrade, take a look at Haltech Plug'n'Play Adaptor Kits. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.
  • A simple Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
  • The quick start guide will walk you through installation of the Haltech Plug'n'Play adaptor into your vehicle.
  • The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.

FEATURES

  • This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
  • Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions. 

More From This Category

Racepak Accessories, Cable A Side Lsu Amp

Racepak Accessories, Cable A Side Lsu Amp

$323.31

Haltech Wiring Harnesses, Elite ECU Plug'n'Play Adaptor Harnesses, Elite 1000/1500 Nissan Silvia S13 (CA18DET) Plug 'n' Play Adaptor Harness, Kit

Haltech Wiring Harnesses, Elite ECU Plug'n'Play Adaptor Harnesses, Elite 1000/1500 Nissan Silvia S13 (CA18DET) Plug 'n' Play Adaptor Harness, Kit

$699.00

Haltech Elite ECU Engine Harnesses, Elite 1500 Mazda 13B S6-8 CAS with Flying Lead Ignition Terminated Harness Injector Connector: Bosch EV1, Kit

Haltech Elite ECU Engine Harnesses, Elite 1500 Mazda 13B S6-8 CAS with Flying Lead Ignition Terminated Harness Injector Connector: Bosch EV1, Kit

$1,477.00

MSD Wiring Harness, LS1, LS6 OEM EFI, Distributorless Ignition 6010, GM, Set

MSD Wiring Harness, LS1, LS6 OEM EFI, Distributorless Ignition 6010, GM, Set

$289.18

Haltech Inputs and CAN Expansion, CAN Adaptors Hubs and Cables, Haltech CAN Cable 8 pin White Tyco to 8 pin White Tyco Length: 75mm (3"), Each

Haltech Inputs and CAN Expansion, CAN Adaptors Hubs and Cables, Haltech CAN Cable 8 pin White Tyco to 8 pin White Tyco Length: 75mm (3"), Each

$50.00