DASH OVERVIEW

With a crisp, clear and full-color display, the all-new Haltech uC-10 Display Dash is now available.

The uC-10 is compatible with Haltech CAN, OBD2, and selected aftermarket ECU brands. It can also be wired in as a complete stand-alone unit. This versatility ensures that it can seamlessly integrate into a wide range of vehicles and setups.

The uC-10 offers plenty of scope for sensors and other inputs in a stand-alone configuration or for use as an I/O expander in a Haltech environment.

  • Full-colour, optically-bonded TFT screen
  • 70° minimum viewing angle (vertical and horizontal)
  • 1280 x 480 resolution, 600+ lumens
  • IP64 (Dust-tight and protected against water splashes)
  • 6-digit odometer
  • 512MB of on-board looped data logging
  • NSP compatible
  • 10 x user configurable AVIP's
  • 4 x user configurable DPO's
  • 4 x user configurable SPI's
  • 1 x dedicated Tacho Input
  • 1 x dedicated alternator excite
  • 2 x Ambient light sensors

All current Haltech ECUs via CAN. Also Plug'n'Play compatible with the following aftermarket ECU brands: Hondata, Link G4, MaxxECU, Microtech, MoTeC M1 series, MoTeC hundred series- (M400,600,800 gold box ECUs), Syvecs.

Includes: 1 x Haltech uC-10 Digital Dash, 1 x 34P connector - same as HT-131001, 1 x Haltech DTM4 to DTM4 CAN cable 3.0m (118in), 1 x USB-C cable, 3 x M5 x 8mm mounting screws, 2 x Momentary switches, pre-terminated 800mm 22AWG Cable, 1 x Glass Mount Wi-Fi antenna (Wi-Fi functionality will be made available with future firmware update), 1 x Haltech fabric keytag, Quick Start Guide, Haltech stickers.

More From This Category

Haltech Inputs and CAN Expansion Products, CAN Thermocouple Expansion Products, 1/4" Open Tip Thermocouple 0.72m (28.5") Length: 0.72m (28.5"), Kit

Haltech Inputs and CAN Expansion Products, CAN Thermocouple Expansion Products, 1/4" Open Tip Thermocouple 0.72m (28.5") Length: 0.72m (28.5"), Kit

$129.00

Haltech Wiring and Connectivity, Engine and Sensor Plugs and Pins, Plug and Pins Only - Bosch 4000psi Fluid Pressure and Temperature Sensor, Each

Haltech Wiring and Connectivity, Engine and Sensor Plugs and Pins, Plug and Pins Only - Bosch 4000psi Fluid Pressure and Temperature Sensor, Each

$20.00

Haltech Outputs and Ignition Systems, Ignition Coils, High Output IGN-1A Inductive Coil with built-in ignition module, Kit

Haltech Outputs and Ignition Systems, Ignition Coils, High Output IGN-1A Inductive Coil with built-in ignition module, Kit

$119.00

Haltech Wiring Harnesses, Elite ECU Plug'n'Play, Elite 1000/1500 Nissan 200SX/Silvia S15 & S14A S2 Plug 'n' Play Adaptor Harness, Kit

Haltech Wiring Harnesses, Elite ECU Plug'n'Play, Elite 1000/1500 Nissan 200SX/Silvia S15 & S14A S2 Plug 'n' Play Adaptor Harness, Kit

$699.00

Haltech Elite 1500 ECU + Mazda 13B S6-8 CAS with IGN-1A Ignition Terminated Harness Kit Injector Connector: Bosch EV1, Kit

Haltech Elite 1500 ECU + Mazda 13B S6-8 CAS with IGN-1A Ignition Terminated Harness Kit Injector Connector: Bosch EV1, Kit

$3,696.00

Haltech Wiring and Connectivity Accessories, Relays and Accessories, Firewall Rubber Wiring Grommet Diameter: 51mm (2") OD 28mm (1 1/8") ID, Each

Haltech Wiring and Connectivity Accessories, Relays and Accessories, Firewall Rubber Wiring Grommet Diameter: 51mm (2") OD 28mm (1 1/8") ID, Each

$20.00