Suits: S4/5 CAS (Crank Angle Sensor)WBC1 CAN O2 Wideband Controller ready (Controller and sensor not included)

Includes: Engine harness with fuse block, firewall grommet and pre-wired High Output IGN-1A Inductive Coil (with built-in Ignitor) Ignition Harness.

Notes: IGN-1A coils are NOT included. Please order 4 x HT-020114 if required.


OVERVIEW

The fastest and most cost effective way to wire your race car or engine conversion!Simply connect a handful of labelled wires and this plug and Play product allows you to be up and running in just a few hours.
  • An efficient Haltech Plug'n'Play product that allows you to be up and running in just a few hours.
  • The quick start guide will walk you through installation of the Haltech Plug'n'Play harness into your vehicle.
  • The guide is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
High Output IGN-1A Coil Terminated Ignition Harness
  • The Haltech Mazda 13B Ignition Harness connects to the Haltech IGN-1A ignition coils
  • (HT-020114). Recommended as an add-on to the Elite 1000/1500 Terminated Engine Harness for Mazda 13B.

FEATURES

  • This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
  • Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions. 

More From This Category

Haltech Elite ECUs, Elite 2500 V8 Small/Big Block GM, Ford & Chrysler Terminated Harness Injector Connector: Bosch EV1, Kit

Haltech Elite ECUs, Elite 2500 V8 Small/Big Block GM, Ford & Chrysler Terminated Harness Injector Connector: Bosch EV1, Kit

$1,299.00

Haltech ECU + Terminated Engine Harness Kits, Toyota 2JZ Terminated Engine Harness ECU Kits, Elite i6 R35 COP Ignition Harness, Kit

Haltech ECU + Terminated Engine Harness Kits, Toyota 2JZ Terminated Engine Harness ECU Kits, Elite i6 R35 COP Ignition Harness, Kit

$339.00

Haltech Wiring Harnesses, Elite ECU Universal Harnesses, Elite 2500 & 2500 T Basic Universal Wire-in Harness Length: 2.5m (8'), Kit

Haltech Wiring Harnesses, Elite ECU Universal Harnesses, Elite 2500 & 2500 T Basic Universal Wire-in Harness Length: 2.5m (8'), Kit

$498.00

Rostra Transmission External Repair Harness, 4R100, E40D, Ford, Lincoln, 1995-1998

Rostra Transmission External Repair Harness, 4R100, E40D, Ford, Lincoln, 1995-1998

$64.37