APR Roll-Control Lowering Springs greatly improve the looks and handling of your Volkswagen MK7 / MK7.5 GTI and Golf R without greatly sacrificing comfort or your wallet! Designed for use with DCC or Non-DCC dampers, our performance lowering springs are a direct plug-and-play upgrade that offer a lower center of gravity and increased spring rates to reduce body roll.

Many lowering springs on the market today simply lower your vehicle and give a false sense of improvement by feeling overly stiff. We took a different approach with our design. We extensively track and street tested several iterations to deliver a system that not only makes your GTI and Golf R look great, but does so while delivering a comfortable experience that doesn't constantly compress and ride on the bump stops or crash and bottom out the dampers. Through a proper ride height configuration, we're able to greatly increase spring rates for improved handling, but do so without leaving the ride harsh, bouncy, and uncomfortable. Your GTI will be planted with a minimal impact on comfort. It's a system you'll love the second you're behind the wheel!

These springs were designed in house and manufactured in the USA using a premium high tensile chrome silicon steel for excellent resilience against sagging and failure for years to come. Each spring comes powder coated in our signature red color, further protecting the spring from the elements. The front and rear springs are a dual rate spring that will operate as a single rate, linear spring, under normal loaded driving situations. All center of wheel to fender (CF) measurements were recorded on our in-house US Spec 2017 MK7 GTI (Non-DCC), US Spec 2018 MK7.5 GTI (DCC), and US Spec 2018 MK7.5 Golf R (DCC) test vehicles and may vary slightly from vehicle to vehicle. Lastly, while this system was designed specifically for the MK7 / MK7.5 GTI, it will fit other similar platform vehicles.

Specifications:

US 2018 MK7.5 GTI (DCC) Front:
362 mm (OEM) vs 340 mm (APR) or a 22 mm reduction in CF Height
215 lbs/in (OEM) vs 323 lbs/in (APR) or a 50% increase in Spring Rate

US 2018 MK7.5 GTI (DCC) Rear:
370 mm (OEM) vs 333 mm (APR) or a 37 mm reduction in CF Height
226 lbs/in (OEM) vs 362 lbs/in (APR) or a 60% increase in Spring Rate

US 2017 MK7 GTI (Non-DCC) Front:
368 mm (OEM) vs 350 mm (APR) or a 18 mm reduction in CF Height
184 lbs/in (OEM) vs 323 lbs/in (APR) or a 76% increase in Spring Rate

US 2017 MK7 GTI (Non-DCC) Rear:
367 mm (OEM) vs 335 mm (APR) or a 32 mm reduction in CF Height
250 lbs/in (OEM) vs 362 lbs/in (APR) or a 45% increase in Spring Rate

US 2019 MK7.5 Golf R (DCC) Front:
346 mm (OEM) vs 341 mm (APR) or a 5 mm reduction in CF Height
216 lbs/in (OEM) vs 323 lbs/in (APR) or a 50% increase in Spring Rate

US 2019 MK7.5 Golf R (DCC) Rear:
356 mm (OEM) vs 333 mm (APR) or a 22 mm reduction in CF Height
245 lbs/in (OEM) vs 362 lbs/in (APR) or a 48% increase in Spring Rate

Features:
APR Roll-Control Lowering Springs greatly improve the looks and handling of your Volkswagen MK7 / MK7.5 GTI and Golf R without greatly sacrificing comfort or your wallet! Designed for use with DCC or Non-DCC dampers, our performance lowering springs are a direct plug-and-play upgrade that offer a lower center of gravity and increased spring rates to reduce body roll.

Many lowering springs on the market today simply lower your vehicle and give a false sense of improvement by feeling overly stiff. We took a different approach with our design. We extensively track and street tested several iterations to deliver a system that not only makes your GTI and Golf R look great, but does so while delivering a comfortable experience that doesn't constantly compress and ride on the bump stops or crash and bottom out the dampers. Through a proper ride height configuration, we're able to greatly increase spring rates for improved handling, but do so without leaving the ride harsh, bouncy, and uncomfortable. Your GTI will be planted with a minimal impact on comfort. It's a system you'll love the second you're behind the wheel!

These springs were designed in house and manufactured in the USA using a premium high tensile chrome silicon steel for excellent resilience against sagging and failure for years to come. Each spring comes powder coated in our signature red color, further protecting the spring from the elements. The front and rear springs are a dual rate spring that will operate as a single rate, linear spring, under normal loaded driving situations. All center of wheel to fender (CF) measurements were recorded on our in-house US Spec 2017 MK7 GTI (Non-DCC), US Spec 2018 MK7.5 GTI (DCC), and US Spec 2018 MK7.5 Golf R (DCC) test vehicles and may vary slightly from vehicle to vehicle. Lastly, while this system was designed specifically for the MK7 / MK7.5 GTI, it will fit other similar platform vehicles.

Specifications:

US 2018 MK7.5 GTI (DCC) Front:
362 mm (OEM) vs 340 mm (APR) or a 22 mm reduction in CF Height
215 lbs/in (OEM) vs 323 lbs/in (APR) or a 50% increase in Spring Rate

US 2018 MK7.5 GTI (DCC) Rear:
370 mm (OEM) vs 333 mm (APR) or a 37 mm reduction in CF Height
226 lbs/in (OEM) vs 362 lbs/in (APR) or a 60% increase in Spring Rate

US 2017 MK7 GTI (Non-DCC) Front:
368 mm (OEM) vs 350 mm (APR) or a 18 mm reduction in CF Height
184 lbs/in (OEM) vs 323 lbs/in (APR) or a 76% increase in Spring Rate

US 2017 MK7 GTI (Non-DCC) Rear:
367 mm (OEM) vs 335 mm (APR) or a 32 mm reduction in CF Height
250 lbs/in (OEM) vs 362 lbs/in (APR) or a 45% increase in Spring Rate

US 2019 MK7.5 Golf R (DCC) Front:
346 mm (OEM) vs 341 mm (APR) or a 5 mm reduction in CF Height
216 lbs/in (OEM) vs 323 lbs/in (APR) or a 50% increase in Spring Rate

US 2019 MK7.5 Golf R (DCC) Rear:
356 mm (OEM) vs 333 mm (APR) or a 22 mm reduction in CF Height
245 lbs/in (OEM) vs 362 lbs/in (APR) or a 48% increase in Spring Rate
APR Roll-Control Lowering Springs greatly improve the looks and handling of your Volkswagen MK7 / MK7.5 GTI and Golf R without greatly sacrificing comfort or your wallet! Designed for use with DCC or Non-DCC dampers, our performance lowering springs are a direct plug-and-play upgrade that offer a lower center of gravity and increased spring rates to reduce body roll.

Many lowering springs on the market today simply lower your vehicle and give a false sense of improvement by feeling overly stiff. We took a different approach with our design. We extensively track and street tested several iterations to deliver a system that not only makes your GTI and Golf R look great, but does so while delivering a comfortable experience that doesn't constantly compress and ride on the bump stops or crash and bottom out the dampers. Through a proper ride height configuration, we're able to greatly increase spring rates for improved handling, but do so without leaving the ride harsh, bouncy, and uncomfortable. Your GTI will be planted with a minimal impact on comfort. It's a system you'll love the second you're behind the wheel!

These springs were designed in house and manufactured in the USA using a premium high tensile chrome silicon steel for excellent resilience against sagging and failure for years to come. Each spring comes powder coated in our signature red color, further protecting the spring from the elements. The front and rear springs are a dual rate spring that will operate as a single rate, linear spring, under normal loaded driving situations. All center of wheel to fender (CF) measurements were recorded on our in-house US Spec 2017 MK7 GTI (Non-DCC), US Spec 2018 MK7.5 GTI (DCC), and US Spec 2018 MK7.5 Golf R (DCC) test vehicles and may vary slightly from vehicle to vehicle. Lastly, while this system was designed specifically for the MK7 / MK7.5 GTI, it will fit other similar platform vehicles.

Specifications:

US 2018 MK7.5 GTI (DCC) Front:
362 mm (OEM) vs 340 mm (APR) or a 22 mm reduction in CF Height
215 lbs/in (OEM) vs 323 lbs/in (APR) or a 50% increase in Spring Rate

US 2018 MK7.5 GTI (DCC) Rear:
370 mm (OEM) vs 333 mm (APR) or a 37 mm reduction in CF Height
226 lbs/in (OEM) vs 362 lbs/in (APR) or a 60% increase in Spring Rate

US 2017 MK7 GTI (Non-DCC) Front:
368 mm (OEM) vs 350 mm (APR) or a 18 mm reduction in CF Height
184 lbs/in (OEM) vs 323 lbs/in (APR) or a 76% increase in Spring Rate

US 2017 MK7 GTI (Non-DCC) Rear:
367 mm (OEM) vs 335 mm (APR) or a 32 mm reduction in CF Height
250 lbs/in (OEM) vs 362 lbs/in (APR) or a 45% increase in Spring Rate

US 2019 MK7.5 Golf R (DCC) Front:
346 mm (OEM) vs 341 mm (APR) or a 5 mm reduction in CF Height
216 lbs/in (OEM) vs 323 lbs/in (APR) or a 50% increase in Spring Rate

US 2019 MK7.5 Golf R (DCC) Rear:
356 mm (OEM) vs 333 mm (APR) or a 22 mm reduction in CF Height
245 lbs/in (OEM) vs 362 lbs/in (APR) or a 48% increase in Spring Rate

Features:
APR Roll-Control Lowering Springs greatly improve the looks and handling of your Volkswagen MK7 / MK7.5 GTI and Golf R without greatly sacrificing comfort or your wallet! Designed for use with DCC or Non-DCC dampers, our performance lowering springs are a direct plug-and-play upgrade that offer a lower center of gravity and increased spring rates to reduce body roll.

Many lowering springs on the market today simply lower your vehicle and give a false sense of improvement by feeling overly stiff. We took a different approach with our design. We extensively track and street tested several iterations to deliver a system that not only makes your GTI and Golf R look great, but does so while delivering a comfortable experience that doesn't constantly compress and ride on the bump stops or crash and bottom out the dampers. Through a proper ride height configuration, we're able to greatly increase spring rates for improved handling, but do so without leaving the ride harsh, bouncy, and uncomfortable. Your GTI will be planted with a minimal impact on comfort. It's a system you'll love the second you're behind the wheel!

These springs were designed in house and manufactured in the USA using a premium high tensile chrome silicon steel for excellent resilience against sagging and failure for years to come. Each spring comes powder coated in our signature red color, further protecting the spring from the elements. The front and rear springs are a dual rate spring that will operate as a single rate, linear spring, under normal loaded driving situations. All center of wheel to fender (CF) measurements were recorded on our in-house US Spec 2017 MK7 GTI (Non-DCC), US Spec 2018 MK7.5 GTI (DCC), and US Spec 2018 MK7.5 Golf R (DCC) test vehicles and may vary slightly from vehicle to vehicle. Lastly, while this system was designed specifically for the MK7 / MK7.5 GTI, it will fit other similar platform vehicles.

Specifications:

US 2018 MK7.5 GTI (DCC) Front:
362 mm (OEM) vs 340 mm (APR) or a 22 mm reduction in CF Height
215 lbs/in (OEM) vs 323 lbs/in (APR) or a 50% increase in Spring Rate

US 2018 MK7.5 GTI (DCC) Rear:
370 mm (OEM) vs 333 mm (APR) or a 37 mm reduction in CF Height
226 lbs/in (OEM) vs 362 lbs/in (APR) or a 60% increase in Spring Rate

US 2017 MK7 GTI (Non-DCC) Front:
368 mm (OEM) vs 350 mm (APR) or a 18 mm reduction in CF Height
184 lbs/in (OEM) vs 323 lbs/in (APR) or a 76% increase in Spring Rate

US 2017 MK7 GTI (Non-DCC) Rear:
367 mm (OEM) vs 335 mm (APR) or a 32 mm reduction in CF Height
250 lbs/in (OEM) vs 362 lbs/in (APR) or a 45% increase in Spring Rate

US 2019 MK7.5 Golf R (DCC) Front:
346 mm (OEM) vs 341 mm (APR) or a 5 mm reduction in CF Height
216 lbs/in (OEM) vs 323 lbs/in (APR) or a 50% increase in Spring Rate

US 2019 MK7.5 Golf R (DCC) Rear:
356 mm (OEM) vs 333 mm (APR) or a 22 mm reduction in CF Height
245 lbs/in (OEM) vs 362 lbs/in (APR) or a 48% increase in Spring Rate