The Chrysler 845RE and ZF8HP45/55/70 clutch holding valves provide solenoid feedback pressure to the clutch control valves, balancing each control valve to assist with apply and release of the respective clutch. Excess wear at a clutch holding valve bore allows crucial fluid to escape the circuit. This can cause shift timing problems, a burnt clutch, ratio and solenoid codes, or loss of gears. Reconditioning the bore and installing Sonnax oversized clutch holding valve kit 35740-20K eliminates bore wear and stops leakage for renewed clutch operation.

Hardcoat anodized valve combats premature wear
Annular grooves help center the valve in the bore to resist wear

More From This Category

Sonnax Tcc Regulator Valve, Ford, 4R44E/4R55E, 5R44E/5R55E, Each

Sonnax Tcc Regulator Valve, Ford, 4R44E/4R55E, 5R44E/5R55E, Each

$29.02

COMP Cams Valve, Sportsman, Stainless Steel, Intake, GM LS7, 2.200 in. Head, 5.550 in. Length, Set of 8

COMP Cams Valve, Sportsman, Stainless Steel, Intake, GM LS7, 2.200 in. Head, 5.550 in. Length, Set of 8

$1,910.22

MANLEY Valve, Severe Duty, Intake, 2.3 in. Head Dia, 0.3415 in. Stem Dia, 5.494 in. Length, Each

MANLEY Valve, Severe Duty, Intake, 2.3 in. Head Dia, 0.3415 in. Stem Dia, 5.494 in. Length, Each

$79.73

MANLEY Valve, Titanium, Intake, Bead Loc, 2.3 in. Head Dia, 0.3415 in. Stem Dia, 5.5 in. Length, Set of 8

MANLEY Valve, Titanium, Intake, Bead Loc, 2.3 in. Head Dia, 0.3415 in. Stem Dia, 5.5 in. Length, Set of 8

$2,678.30

MANLEY Valve, Titanium, Intake, 2.25 in. Head Dia, 0.3415 in. Stem Dia, 5.25 in. Length, Set of 8

MANLEY Valve, Titanium, Intake, 2.25 in. Head Dia, 0.3415 in. Stem Dia, 5.25 in. Length, Set of 8

$2,678.30

MANLEY Valve, Titanium, Exhaust, Bead Loc, 1.6 in. Head Dia, 0.3415 in. Stem Dia, 5.14 in. Height, Set of 8

MANLEY Valve, Titanium, Exhaust, Bead Loc, 1.6 in. Head Dia, 0.3415 in. Stem Dia, 5.14 in. Height, Set of 8

$2,584.74