Bore wear is common in VW/Audi 01J units due to contamination and high system pressure. Any unit with a worn clutch control valve and/or bore can show clutch chatter on forward or reverse engagement and clutch friction failure and overheat. These symptoms are caused by the loss of fluid pressure to the forward or reverse clutches due to excessive wear, allowing critical hydraulic pressure to leak to adjacent circuits or to the sump. OE function and performance can be expected after installing the Sonnax oversized clutch control (KSV) valve kit 33741B-03K.

Hardcoat anodized aluminum valve combats premature wear
Restores proper hydraulic sealing and OE pressure control

More From This Category

MANLEY Valve, Titanium, Exhaust, 1.6 in. Head Dia, 0.3415 in. Stem Dia, 5.56 in. Height, Each

MANLEY Valve, Titanium, Exhaust, 1.6 in. Head Dia, 0.3415 in. Stem Dia, 5.56 in. Height, Each

$307.70

MANLEY Valve, Severe Duty, Exhaust, 1.9 in. Head Dia, 0.3715 in. Stem Dia, 5.464 in. Length, BBC, Set of 8

MANLEY Valve, Severe Duty, Exhaust, 1.9 in. Head Dia, 0.3715 in. Stem Dia, 5.464 in. Length, BBC, Set of 8

$607.34

Sonnax B1 Apply Boost Valve Kit, U760E, U760F, Each

Sonnax B1 Apply Boost Valve Kit, U760E, U760F, Each

$82.13

MANLEY Valve, Severe Duty, Exhaust, 1.625 in. Head Dia, 0.3415 in. Stem Dia, 4.936 in. Length, SBC, Each

MANLEY Valve, Severe Duty, Exhaust, 1.625 in. Head Dia, 0.3415 in. Stem Dia, 4.936 in. Length, SBC, Each

$75.93

MANLEY Valve, Severe Duty, Intake, 2.4 in. Head Dia, 0.3415 in. Stem Dia, 6.03 in. Length, Set of 8

MANLEY Valve, Severe Duty, Intake, 2.4 in. Head Dia, 0.3415 in. Stem Dia, 6.03 in. Length, Set of 8

$628.35