RTS’ Ford 9” drum brake kits will help your ride stop better. They include new steel backing plates, new wheel solenoids, bonded brake shoes, new hardware and large 11” steel brake drums. They are predrilled to accept 1/2” studs and can be drilled out to 5/8” if necessary. These kits include 2 assembled backing plates with brake shoes, wheel cylinders, self-adjusters, park brake lever and springs.

Features:

  • 5 x 4.50” and 5 x 4.75” bolt patterns
  • 1” diameter wheel cylinder
  • 3.15” centre pilot hole
  • 3.500” x 2.375"  attaching bolt pattern - 1/2" holes
  • 2.50" Axle face to backing plate offset
  • 2.77” brake drum register diameter. Note axles with smaller register must use hub rings to locate/centralise brake drum
  • 2.25" Brake Shoes

More From This Category

Wilwood Bolt, Hex Head, Alloy Steel, 10.9, Hex, 45mm in. Length, M14-2.00 Thread, Kit

Wilwood Bolt, Hex Head, Alloy Steel, 10.9, Hex, 45mm in. Length, M14-2.00 Thread, Kit

$12.74

Wilwood Assembly, Long Reservoir/Diaaphragm/Ring/ Cap, M/C, Rm1

Wilwood Assembly, Long Reservoir/Diaaphragm/Ring/ Cap, M/C, Rm1

$18.56

Strange ,DUAL BRAKE KIT /H1143 ENDS /2 PC ROTOR /HARD PADS

Strange ,DUAL BRAKE KIT /H1143 ENDS /2 PC ROTOR /HARD PADS

$3,104.00

Wilwood Flexline, 22.00 in. Length, M10 BF Female to -3 Female, For BMW E90, Kit

Wilwood Flexline, 22.00 in. Length, M10 BF Female to -3 Female, For BMW E90, Kit

$184.51