RTS OEM replacement axles are produced using state of the art equipment and manufacturing techniques. These 4140 Induction hardened steel axles shafts are non-tapered with hardened bearing seats and machined to fit directly into your factory fitted Ford 9 inch diff. They feature extra spline length on the end so they can be cut to fit your exact length in a modified situation. When quality is your aim, RTS axle shafts should be your choice. RTS Axle Decal included.

  • 5 x 4.50" Stud pattern
  • Suits small bearing
  • Brake drum hub 2.427/61.65mm
  • .605"hole diameter for factory style press in wheel studs  
  • 100mm spline length allows for shortening
  • Note, prior to fitting assembled axle you need to lubricate axle seal surface area to stop seal burn
  • This is a street performance axle which exceeds oem strength/quality and not a high-powered race axle.
  • Available in XR to XY length & XA onward length
  • Dedicated Left and Right hand side length

More From This Category

Strange ,S60 / GM F-Body tubed / No ends or mounts

Strange ,S60 / GM F-Body tubed / No ends or mounts

$2,006.12

Strange ,Axles, Street Series, 1986-1993 Mustang 8.8, 35 Spline, 1550 Steel, C-Clip Eliminator, Spool, 5/8 in. Studs, Ford, Kit

Strange ,Axles, Street Series, 1986-1993 Mustang 8.8, 35 Spline, 1550 Steel, C-Clip Eliminator, Spool, 5/8 in. Studs, Ford, Kit

$1,638.02

Strange ,Dana 60 Rear Pinion Bearing- Hm803146

Strange ,Dana 60 Rear Pinion Bearing- Hm803146

$64.05

Strange ,S60 / GM A-Body tubed / No ends or mounts

Strange ,S60 / GM A-Body tubed / No ends or mounts

$1,678.80

Strange ,35 spline gun-drilled axles, bearings, & 5/8" stud kit

Strange ,35 spline gun-drilled axles, bearings, & 5/8" stud kit

$1,659.71

Strange ,Axle, Hy-Tuf Floater, 40 spline, Gundrilled, 28 1/8 in. - 32 in, Each

Strange ,Axle, Hy-Tuf Floater, 40 spline, Gundrilled, 28 1/8 in. - 32 in, Each

$665.19