RaceQuip Helmet Pro Series, Top Air Pro20 Sa2020 Flblk Xxl Helmet

Description

The RaceQuip PRO20 TOP AIR Helmet is a Snell SA2020 rated full face auto racing helmet that incorporates contemporary styling with modern production techniques. The shell is built using pre-preg composite materials placed into pressurized steel molds to achieve the best combination of light weight and strength. These helmets are also sometimes called forced air, blower, or pumper helmets because they have a provision on the helmet to attach a fresh air hose. The unique manifold design gives this helmet a super low profile that will fit in any car and utilizes an inlet barb that works with standard 1.250" round hose. The forced air is channeled from the manifold all the way to the forehead area where it blows downward across the faceshield. The forced air keeps you cool and keeps the faceshield fog free. Reinforced M6 threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features a red anodized aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt.

Features:
The RaceQuip PRO20 TOP AIR Helmet is a Snell SA2020 rated full face auto racing helmet that incorporates contemporary styling with modern production techniques. The shell is built using pre-preg composite materials placed into pressurized steel molds to achieve the best combination of light weight and strength. These helmets are also sometimes called forced air, blower, or pumper helmets because they have a provision on the helmet to attach a fresh air hose. The unique manifold design gives this helmet a super low profile that will fit in any car and utilizes an inlet barb that works with standard 1.250" round hose. The forced air is channeled from the manifold all the way to the forehead area where it blows downward across the faceshield. The forced air keeps you cool and keeps the faceshield fog free. Reinforced M6 threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features a red anodized aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt.