Proflow Cylinder Heads & Roller Rocker kit, AirMax 205 and Aluminium Roller Rockers

Proflow does not sacrifice quality for a low price--you get both with our aluminium cylinder heads. The lightweight heads are cast from A-356 aluminium alloy with a large choice of Engine, for SB & BB Chevrolet, LS Chev Holden Ford SB 289-351W, 302,351 Cleveland 2V & 3V & BB FE, and Chrysler SB & BB, phosphorous bronze valve guides, and ductile iron valve seats for use with unleaded gas. They're also end-milled and drilled for accessories. The fully assembled heads have stainless steel valves, High Performance valve springs, 7 degree valve locks. Perfect for your Mild or High performance Hot Rod.

SPECIFICATIONS

Material: 356 Alloy, T6
Chamber Volume: 68cc
Intake Runner Volume: 207cc
Intake Port location: OEM
Minimum Cross Section: 2.18 square inches (min)
Exhaust Runner Volume: 125cc - high velocity
Exhaust Port Location: Raised .080'' (near stock location)
Valve sizes: Intake 2.10" (45 degree seat, custom 5 angles blended) Exhaust 1.650'' (45 degree seat custom high velocity radius/blended)
Valve Guide Angles: Canted Valve angles Intake 10.0 x 4.0 degrees Exhaust: 9.5 x 3.0 degrees
Valve Guides: Bronze.502'' od x 11/32'' stems.570" shoulder
Valve Seat Inserts: Intake: 2.250'' x 1.880 x 3/8 (Durabond 7000 series) Exhaust: 1.680'' x 1.430'' x 3/8
Spark Plugs: relocated for efficient fast burn, ¾ reach, 5/8 hex, washer seat (NGKBCP7ES)
Spring Pads: 1.570'' OD / .560'' ID
Valve Spring Height: 1.960'' (with stock length valve)
Pushrods: 5/16'' or 3/8'' (check required length)
Rocker Arm Studs: 7/16'' unc
Rocker Arm Type: 7/16'' stud mounted roller rockers (1.73 ratio)
Ext Water Port: Heads have 3/4 npt tapped hole on each end which need to be plugged if not used
Head Bolts: Accept oem length bolts or studs
Proflow Cylinder Heads & Rocker kit, AirMax 200, Assembled Aluminium, Ford Cleveland , 2V 68cc Chamber, 205cc Intake Runner & Aluminium Rockers Pair Diagram Image

More From This Category

AFR Valve Spring Set, 1.640" OD suits Solid Roller, .840” max lift, Set of 16

AFR Valve Spring Set, 1.640" OD suits Solid Roller, .840” max lift, Set of 16

$1,126.91