Wilwood’s 7/8 in. or 15/16 in. bore Tandem Aluminum Master Cylinders available in 3 finishes, plain, ball burnished, and black e-coat. These master cylinders are designed primarily for manual applications and include a pushrod. They’re designed for mount flanges from 3.22 to 3.40, common measurements for most domestic cars and trucks from the mid 1960s to present, and offer fluid outlet ports on both sides of the bore. The stroke is set at 1.10 with a volume ratio of 2:1 between the primary and secondary chambers. Machined from high-pressure die castings, each master cylinder weighs only 3lbs, a 75% weight savings over most cast iron OE type master cylinders. We also offer a combination proportioning valve kit, which includes brackets and stainless lines specifically for use with this master cylinder, see PN 260-13190, or 220-13189 for retrofit kit.

More From This Category

COMP Cams Rocker Arm, Ultra Pro Magnum, Full Roller, Chromoly Steel, 1.6 Ratio, For Chevrolet V6 and SBC 3/8 in. Stud, Each

COMP Cams Rocker Arm, Ultra Pro Magnum, Full Roller, Chromoly Steel, 1.6 Ratio, For Chevrolet V6 and SBC 3/8 in. Stud, Each

$65.07

6Boost Exhaust Manifold, Izusu G180, T3/Nil 'Open Entry' to suit IWG

6Boost Exhaust Manifold, Izusu G180, T3/Nil 'Open Entry' to suit IWG

$1,100.00

QA1 Front Sway Bar, 71-76 GM B-Body

QA1 Front Sway Bar, 71-76 GM B-Body

$808.58

Whiteline Front Control Arm, Upper Inner, Rear Bushing, 46.6mm and 45.6mm OD, 28mm ID, Toyota, Kit

Whiteline Front Control Arm, Upper Inner, Rear Bushing, 46.6mm and 45.6mm OD, 28mm ID, Toyota, Kit

$117.96

Dakota Digital Gauge, MDX System, 1955-56 Chevy Car, Black Alloy Style Face, Blue Display, Custom

Dakota Digital Gauge, MDX System, 1955-56 Chevy Car, Black Alloy Style Face, Blue Display, Custom

$1,968.40