Trick Flow's engine priming pump kit is the easy and best way to pre-lube a freshly-built GM LS, Ford modular, Gen III Hemi, or any other engine with a crank driven oil pump. In fact, this priming pump kit can also be used to transfer non-flammable fluids such as gear lube and transmission fluid. Included in the kit is the engine priming/fluid transfer pump, a driveshaft, 10 ft. of -6 AN hose, and an assortment of fittings and adapters required to turn your 3/8" drill into a fluid pumping machine!

More From This Category

COMP Cams Pushrod, Hi-Tech, Chromoly, Heat-Treated, 8.175 in. Long, .080 in. Wall, 3/8 in. Diameter, Set of 16

COMP Cams Pushrod, Hi-Tech, Chromoly, Heat-Treated, 8.175 in. Long, .080 in. Wall, 3/8 in. Diameter, Set of 16

$454.35

COMP Cams Push Rod, Dual Taper, Chromoly, 8.750 in. Long, .165 in. Wall, 7/16 in. Diameter, Each

COMP Cams Push Rod, Dual Taper, Chromoly, 8.750 in. Long, .165 in. Wall, 7/16 in. Diameter, Each

$38.46

COMP Cams Push Rod, Dual Taper, Chromoly, 8.950 in. Long, .165 in. Wall, 7/16 in. Diameter, Each

COMP Cams Push Rod, Dual Taper, Chromoly, 8.950 in. Long, .165 in. Wall, 7/16 in. Diameter, Each

$38.46

LSM Racing Conversion Kit To Convert A Standard Pc-100 Into A Slant/Straight Handle Option.

LSM Racing Conversion Kit To Convert A Standard Pc-100 Into A Slant/Straight Handle Option.

$77.65

COMP Cams Pushrod, Hi-Tech, Chromoly, Heat-Treated, 11.000 in. Long, .080 in. Wall, 3/8 in. Diameter, Set of 16

COMP Cams Pushrod, Hi-Tech, Chromoly, Heat-Treated, 11.000 in. Long, .080 in. Wall, 3/8 in. Diameter, Set of 16

$503.06