The proper length pushrod is critical to achieving correct valvetrain geometry. Trick Flow one-piece chromoly pushrods are available in a variety of lengths for use with all high performance applications. The pushrods are cold-formed from 4130 chromoly steel with a .080 in. wall thickness for strength and durability. Plus, the oil hole is closed to within .040 in. then drilled and chamfered to .093 in. to eliminate stress fractures and cracks before being induction-hardened and heat-treated for use with guideplates. These pushrods are available in 5/16 in. diameter in any length from 6.250 in.-9.000 in. and in 3/8 in. diameter between 7.650 in.-9.950 in. in .050 in. increments.

More From This Category

Trick Flow Guideplate, Flat, 3/8 in. Pushrod Size, For Ford, 429, 460, A-460, Each

Trick Flow Guideplate, Flat, 3/8 in. Pushrod Size, For Ford, 429, 460, A-460, Each

$28.57

COMP Cams Pushrod, Hi-Tech, Chromoly, Heat-Treated, 7.000 in. Long, .080 in. Wall, 5/16 in. Diameter, Set of 16

COMP Cams Pushrod, Hi-Tech, Chromoly, Heat-Treated, 7.000 in. Long, .080 in. Wall, 5/16 in. Diameter, Set of 16

$386.97

MANLEY Guide Plate, 429, 460 For Ford, 3/8 in. Pushrods, Set of 8

MANLEY Guide Plate, 429, 460 For Ford, 3/8 in. Pushrods, Set of 8

$108.54

COMP Cams Pushrod, Magnum, Chromoly, Heat-Treated 8.500 in. Long, .080 in. Wall, 5/16 in. Diameter, Set of 16

COMP Cams Pushrod, Magnum, Chromoly, Heat-Treated 8.500 in. Long, .080 in. Wall, 5/16 in. Diameter, Set of 16

$308.92