The proper length pushrod is critical to achieving correct valvetrain geometry. Trick Flow one-piece chromoly pushrods are available in a variety of lengths for use with all high performance applications. The pushrods are cold-formed from 4130 chromoly steel with a .080 in. wall thickness for strength and durability. Plus, the oil hole is closed to within .040 in. then drilled and chamfered to .093 in. to eliminate stress fractures and cracks before being induction-hardened and heat-treated for use with guideplates. These pushrods are available in 5/16 in. diameter in any length from 6.250 in.-9.000 in. and in 3/8 in. diameter between 7.650 in.-9.950 in. in .050 in. increments.

More From This Category

Proflow Chrome Moly Pushrods 7.100" x 3/8", .110" Wall Thickness, 210 deg Radius Ball End, Heat Treated, Set

Proflow Chrome Moly Pushrods 7.100" x 3/8", .110" Wall Thickness, 210 deg Radius Ball End, Heat Treated, Set

$239.00

Crow Cams Push Rod 7.450" x 5/16" Chrome Moly, Bulk pack of 80

Crow Cams Push Rod 7.450" x 5/16" Chrome Moly, Bulk pack of 80

$1,468.58

Manley Pushrods, 4130, 5/16", 7.925", Set of 16

Manley Pushrods, 4130, 5/16", 7.925", Set of 16

$387.75

MANLEY Pushrod, Swedged End, 4130 Chromoly, 3/8 in. Dia, 11.100 in. Length, .135 in. Wall, Each

MANLEY Pushrod, Swedged End, 4130 Chromoly, 3/8 in. Dia, 11.100 in. Length, .135 in. Wall, Each

$40.10