The proper length pushrod is critical to achieving correct valvetrain geometry. Trick Flow one-piece chromoly pushrods are available in a variety of lengths for use with all high performance applications. The pushrods are cold-formed from 4130 chromoly steel with a .080 in. wall thickness for strength and durability. Plus, the oil hole is closed to within .040 in. then drilled and chamfered to .093 in. to eliminate stress fractures and cracks before being induction-hardened and heat-treated for use with guideplates. These pushrods are available in 5/16 in. diameter in any length from 6.250 in.-9.000 in. and in 3/8 in. diameter between 7.650 in.-9.950 in. in .050 in. increments.

More From This Category

Crow Cams Pushrod, 8.700? 5/16" Super Duty, Set of 16

Crow Cams Pushrod, 8.700? 5/16" Super Duty, Set of 16

$272.62

Trick Flow Pushrods, Assembled, Chromoly, 3/8 in. Diameter, 5/16 in. Tip Diameter, Ball Tip, 7.775 in. Length, 0.080 in. Wall, Set of 8

Trick Flow Pushrods, Assembled, Chromoly, 3/8 in. Diameter, 5/16 in. Tip Diameter, Ball Tip, 7.775 in. Length, 0.080 in. Wall, Set of 8

$187.78

Trick Flow Pushrods, 5/16 in. Diameter, 9.000 in. Long, 4130 Chromoly, 0.080 in. Wall, For Guideplates, Set of 16

Trick Flow Pushrods, 5/16 in. Diameter, 9.000 in. Long, 4130 Chromoly, 0.080 in. Wall, For Guideplates, Set of 16

$305.95

Proflow Chrome Moly Pushrods 6.400" x 5/16", .110" Wall Thickness, 210 deg Radius Ball End, Heat Treated, Set

Proflow Chrome Moly Pushrods 6.400" x 5/16", .110" Wall Thickness, 210 deg Radius Ball End, Heat Treated, Set

$239.00