Proflow's LS standalone wiring harness kits offer the best in aesthetics and reliability, designed specifically for GM LS engines produced from 1997 to 2004. They are available for both cable-driven and fly-by-wire vehicles with 4L60E or T56 transmissions, and will completely replace your old harness.

Note: These are based off original LS harnesses. Some plugs may be different depending on engine build date. No oil pressure sensor wire is provided/catered for, as this is a aftermarket loom and relies on aftermarket engine management to cater for oil pressure monitoring

Kits Include:

  • Fuse/Relay Box
  • Fuel Pump Control
  • Fan Controls
  • Check Engine Lights
  • Speedometer/Tachometer
  • OBD2 Compatibility
  • Pedal and Throttle Control
  • IAC Sensor
  • MAP Sensor
  • MAF Sensor 3 pin Early Gen 3  with separate IAT sensor
  • MAF Sensor 5 pin Late Gen 3 (you will only use 1 of the MAF sensor plugs depending on your application
  • Coolant Sensors
  • Alternator Plugs
  • O2 Sensors
  • Crankshaft and Camshaft Position
  • Fuel Injectors
  • Coil Packs
  • Knock sensors

More From This Category

Haltech Wiring Harnesses, Elite ECU Plug'n'Play Adaptor Harnesses, Elite 1500 Yamaha WaveRunner FX, FZS, FZR Plug 'n' Play Adaptor Harness, Kit

Haltech Wiring Harnesses, Elite ECU Plug'n'Play Adaptor Harnesses, Elite 1500 Yamaha WaveRunner FX, FZS, FZR Plug 'n' Play Adaptor Harness, Kit

$699.00

Racepak Accessories, Cable A Side Lsu Amp

Racepak Accessories, Cable A Side Lsu Amp

$323.31

Haltech Wiring Harnesses, Elite ECU Plug'n'Play Adaptor Harnesses, Elite 1000/1500 Nissan Silvia S13 (CA18DET) Plug 'n' Play Adaptor Harness, Kit

Haltech Wiring Harnesses, Elite ECU Plug'n'Play Adaptor Harnesses, Elite 1000/1500 Nissan Silvia S13 (CA18DET) Plug 'n' Play Adaptor Harness, Kit

$699.00

Haltech Elite ECU Engine Harnesses, Elite 1500 Mazda 13B S6-8 CAS with Flying Lead Ignition Terminated Harness Injector Connector: Bosch EV1, Kit

Haltech Elite ECU Engine Harnesses, Elite 1500 Mazda 13B S6-8 CAS with Flying Lead Ignition Terminated Harness Injector Connector: Bosch EV1, Kit

$1,477.00

MSD Wiring Harness, LS1, LS6 OEM EFI, Distributorless Ignition 6010, GM, Set

MSD Wiring Harness, LS1, LS6 OEM EFI, Distributorless Ignition 6010, GM, Set

$289.18

Haltech Inputs and CAN Expansion, CAN Adaptors Hubs and Cables, Haltech CAN Cable 8 pin White Tyco to 8 pin White Tyco Length: 75mm (3"), Each

Haltech Inputs and CAN Expansion, CAN Adaptors Hubs and Cables, Haltech CAN Cable 8 pin White Tyco to 8 pin White Tyco Length: 75mm (3"), Each

$50.00