These Manley NexTek valve springs are better-designed valve springs using state-of-the-art machinery for purpose-built racing engines. They're manufactured from super-clean, high-tensile chrome silicon steel and are shot-peened to MIL specs for maximum fatigue life. They feature a proprietary, multi-step heat-treating that minimizes load loss and have computer-aided modeling to minimize valve bounce and valve gear separation. The Manley NexTek valve springs are smaller diameter and lightweight, allowing engines to rev higher faster. They have an extended tip thickness designed to eliminate overload breakage, and their tightly controlled open-end flatness reduces valve stem side loading.

More From This Category

MANLEY Valve Spring Retainer, 10 Degree, H-13, 1.076 in. OD, Single, Set of 16

MANLEY Valve Spring Retainer, 10 Degree, H-13, 1.076 in. OD, Single, Set of 16

$561.39

MANLEY Valve Spring Locator, Outside, Heat-Treated, Fits 1.437 in. OD. Spring, .687 in. ID, 1.550 in. OD, .062 in. Thick, Black, Set of 16

MANLEY Valve Spring Locator, Outside, Heat-Treated, Fits 1.437 in. OD. Spring, .687 in. ID, 1.550 in. OD, .062 in. Thick, Black, Set of 16

$188.60

COMP Cams Valve Spring, Beehive Style, 1.105 in. OD, 1.470 in. Installed Height, 324 lbs./in. Rate, Each

COMP Cams Valve Spring, Beehive Style, 1.105 in. OD, 1.470 in. Installed Height, 324 lbs./in. Rate, Each

$48.98

COMP Cams Valve Seal, PTFE, .500 in. Guide Size, 11/32 in. Valve Stem, Each

COMP Cams Valve Seal, PTFE, .500 in. Guide Size, 11/32 in. Valve Stem, Each

$3.75

MANLEY Valve Lock, 7 Degree Machined, Bead Loc, Steel, .2345 in. Stem, Each

MANLEY Valve Lock, 7 Degree Machined, Bead Loc, Steel, .2345 in. Stem, Each

$9.68

AFR Retainer, MOPAR Gen3 10° 1.250 OD Steel, Set of 16

AFR Retainer, MOPAR Gen3 10° 1.250 OD Steel, Set of 16

$128.00