These Manley NexTek valve springs are better-designed valve springs using state-of-the-art machinery for purpose-built racing engines. They're manufactured from super-clean, high-tensile chrome silicon steel and are shot-peened to MIL specs for maximum fatigue life. They feature a proprietary, multi-step heat-treating that minimizes load loss and have computer-aided modeling to minimize valve bounce and valve gear separation. The Manley NexTek valve springs are smaller diameter and lightweight, allowing engines to rev higher faster. They have an extended tip thickness designed to eliminate overload breakage, and their tightly controlled open-end flatness reduces valve stem side loading.

More From This Category

MANLEY Valve Lock, 10 Degree Machined, Conventional, Steel, +.050 .3415 in. Stem, Set of 16

MANLEY Valve Lock, 10 Degree Machined, Conventional, Steel, +.050 .3415 in. Stem, Set of 16

$162.54

Trick Flow Valve Locks, Machined, Chromoly, 10 Degree, 1-Groove, 11/32 in. Valve Stem, - 0.050 in, Set of 32

Trick Flow Valve Locks, Machined, Chromoly, 10 Degree, 1-Groove, 11/32 in. Valve Stem, - 0.050 in, Set of 32

$136.88

Sonnax Shim, Chrysler, 40Te/S , 41Ae , 41Te/S

Sonnax Shim, Chrysler, 40Te/S , 41Ae , 41Te/S

$16.47

Crow Cams 1.437"x.780" HARD SHIM

Crow Cams 1.437"x.780" HARD SHIM

$2.19

COMP Cams Valve Spring, Dual, 1.536 in. O.D, 483 lbs./in. Rate, 1.170 in. Coil Bind Height, Each

COMP Cams Valve Spring, Dual, 1.536 in. O.D, 483 lbs./in. Rate, 1.170 in. Coil Bind Height, Each

$23.36

COMP Cams Valve Spring Shim, Steel, Hardened, 1.300 in. OD, .520 in. ID .015 in. Thick, Set of 8

COMP Cams Valve Spring Shim, Steel, Hardened, 1.300 in. OD, .520 in. ID .015 in. Thick, Set of 8

$10.54