Manley Super 7 degree Captiv-Loc valve locks were developed by Keith Dorton. They are designed to encapsulate the hardened tip in a titanium valve if it comes loose. They are available in steel or titanium material and will accept any standard 7 degree valve spring retainer. The locks will fit valves with .290 in. to .330 in. tip lengths and use either the conventional or beadlock groove technology. Make the most out of your 7 degree retainers with these Manley Super 7 degree Captiv-Loc valve locks. Image is a representation. Actual product may vary

More From This Category

MANLEY Valve Lock, 10 Degree Machined, Conventional, Steel, .3110 in. Stem, Each

MANLEY Valve Lock, 10 Degree Machined, Conventional, Steel, .3110 in. Stem, Each

$9.68

COMP Cams Valve Lock, Steel, 10 Degree, .308 in./5/16 in, Single Groove, w/ Lash Cap Recess, Pair

COMP Cams Valve Lock, Steel, 10 Degree, .308 in./5/16 in, Single Groove, w/ Lash Cap Recess, Pair

$3.86

MANLEY Valve Lock, 10 Degree Machined, Bead Loc, Steel, 7mm Stem, Each

MANLEY Valve Lock, 10 Degree Machined, Bead Loc, Steel, 7mm Stem, Each

$9.68

COMP Cams Valve Lock, Race, Hardened Steel, Machined, 7 Degree, 5mm Stem, Single Groove, Pair

COMP Cams Valve Lock, Race, Hardened Steel, Machined, 7 Degree, 5mm Stem, Single Groove, Pair

$5.51

Crow Cams 10 Deg SQUARE GROOVE -.050"

Crow Cams 10 Deg SQUARE GROOVE -.050"

$80.67

Crow Cams Valve Locks Single Grv -0.050" Height Machined, 1 pair

Crow Cams Valve Locks Single Grv -0.050" Height Machined, 1 pair

$6.41