Flaming River is now offering Microsteer universal Electric Power Assisted Steering system. It can be easily fitted to virtually any vehicle, without the need to change steering rack or fit a hydraulic system where manual steering currently exists.
The unique Microsteer Tuning Box allows you to adjust the amount of assistance by using a rotary potentiometer or, if you prefer, you can make the system speed sensitive by connecting a wheel speed signal to the Tuning Box. A mode selection switch on the box allows you to choose your preferred method, manual or wheel speed.
If you have no wheel speed sensor on the vehicle, we recommend purchasing a Hall effect type sensor. This is not included in the kit and would need to be purchased separately. The input and output shafts of the Microsteer unit are 11/16”-36.
The Microsteer kit includes:
• Motor/Gearbox (MGU)
• Electronic Control Unit (ECU)
• Tuning Box
• Wiring Harness (damage or modification to the harness will result in voided warranty)
Recomended U-Joint/Coupler
11/16"-36 x 3/4" DD FR1783DD (Billet)
11/16"-36 x 3/4" Smooth FR1948 (Coupler)
Operating Voltage | Nominal 13.8V DC |
Maximum Current Draw | 30 Amps |
Average Current Draw - Amps | Less than 2 Amps |
System Weight MGU & ECU | 9.70lbs/4.4kg |
Maximum Torque Output | 32Nm/24lb.ft |
IP Rating | IP67 |
Operating Temperature | -20 to 120C/-4 to 248F |
Motor Rated Power | 220 Watts |
MGU Spline Pattern | 11/16"-36 Both Ends |
Flaming River is now offering Microsteer universal Electric Power Assisted Steering system. It can be easily fitted to virtually any vehicle, without the need to change steering rack or fit a hydraulic system where manual steering currently exists.
The unique Microsteer Tuning Box allows you to adjust the amount of assistance by using a rotary potentiometer or, if you prefer, you can make the system speed sensitive by connecting a wheel speed signal to the Tuning Box. A mode selection switch on the box allows you to choose your preferred method, manual or wheel speed.
If you have no wheel speed sensor on the vehicle, we recommend purchasing a Hall effect type sensor. This is not included in the kit and would need to be purchased separately. The input and output shafts of the Microsteer unit are 11/16”-36.
The Microsteer kit includes:
• Motor/Gearbox (MGU)
• Electronic Control Unit (ECU)
• Tuning Box
• Wiring Harness (damage or modification to the harness will result in voided warranty)
Recomended U-Joint/Coupler
11/16"-36 x 3/4" DD FR1783DD (Billet)
11/16"-36 x 3/4" Smooth FR1948 (Coupler)
Operating Voltage | Nominal 13.8V DC |
Maximum Current Draw | 30 Amps |
Average Current Draw - Amps | Less than 2 Amps |
System Weight MGU & ECU | 9.70lbs/4.4kg |
Maximum Torque Output | 32Nm/24lb.ft |
IP Rating | IP67 |
Operating Temperature | -20 to 120C/-4 to 248F |
Motor Rated Power | 220 Watts |
MGU Spline Pattern | 11/16"-36 Both Ends |