Solid flat tappet lifters with no oil hole
Available in a set of 12 or 16

Set of 12 to suit Chrysler Slant 6
Important Lifter Preparation Notes:
Please thoroughly clean the lifters in mineral spirits or similar solvent and inspect for any damage in transport. It is a good idea to soak the lifters in engine oil prior to assembly and check that the plunger moves freely if you are using hydraulic type lifters. Often hydraulic type lifters are already filled with oil from the factory but you should still be able to get a small amount of movement from the plunger by using a pushrod and pressing firmly on the seat. Be careful not to damage the cam side of the lifter. Plunger should return to initial position when force is released. Flat tappet lifters should be free to rotate in the lifter bores. Ensure correct preload is used when fitting lifters. If unsure please feel free to contact us.

More From This Category

COMP Cams Lifters, Mechanical Roller, Vertical Link Bar, For Chevrolet, Set of 16

COMP Cams Lifters, Mechanical Roller, Vertical Link Bar, For Chevrolet, Set of 16

$1,364.66

COMP Cams Lifter, Endure-X, Solid Mechanical Roller, Vertical Link Bar, .875 in. Dia, 351C, 351-400M, Set of 16

COMP Cams Lifter, Endure-X, Solid Mechanical Roller, Vertical Link Bar, .875 in. Dia, 351C, 351-400M, Set of 16

$1,299.09

COMP Cams Lifter, Sportsman, Mechanical Roller, Vertical Link, .842 in. Dia, w/ Bushing, For Chevrolet BB, Pair

COMP Cams Lifter, Sportsman, Mechanical Roller, Vertical Link, .842 in. Dia, w/ Bushing, For Chevrolet BB, Pair

$451.19

COMP Cams Lifter, DLC Coated Tool Steel Solid, For Chrysler

COMP Cams Lifter, DLC Coated Tool Steel Solid, For Chrysler

$249.99