Crow Cams valve springs are made from aircraft quality alloy steels to give the best performance and reliability at a reasonable price. They are specially designed to suit our high lift, high acceleration profiles. The following is a guide to popular applications, if your spring is not listed please see the spring specification chart on page xx or contact our technical staff. Making correct measurements before assembly is critical as many variables are present to catch the unwary. Note Dual Valve Springs may require head machining to fit. Dual Valve Springs measured with .100 Thick Retainer

More From This Category

MANLEY Valve Spring and Retainer, NexTek, Dual, Kit

MANLEY Valve Spring and Retainer, NexTek, Dual, Kit

$1,637.90

10 degree Machined Hardened Steel Valve Lock 11/32” Bead Lock, Set of 16

10 degree Machined Hardened Steel Valve Lock 11/32” Bead Lock, Set of 16

$79.93

COMP Cams Valve Spring Shim, Steel, Hardened, 1.250 in. OD, .814 in. ID .015 in. Thick, Each

COMP Cams Valve Spring Shim, Steel, Hardened, 1.250 in. OD, .814 in. ID .015 in. Thick, Each

$1.29

Trick Flow Valve Springs, PAC Racing, Single, 1.437 in. Outside Diameter, 340 lbs./in. Rate, 1.150 in. Coil Bind, Pair

Trick Flow Valve Springs, PAC Racing, Single, 1.437 in. Outside Diameter, 340 lbs./in. Rate, 1.150 in. Coil Bind, Pair

$27.70