Crow Cams valve springs are made from aircraft quality alloy steels to give the best performance and reliability at a reasonable price. They are specially designed to suit our high lift, high acceleration profiles. The following is a guide to popular applications, if your spring is not listed please see the spring specification chart on page xx or contact our technical staff. Making correct measurements before assembly is critical as many variables are present to catch the unwary. Note Dual Valve Springs may require head machining to fit. Dual Valve Springs measured with .100 Thick Retainer

More From This Category

COMP Cams Valve Lash Cap, 3/8 in. Valve Stem, .080 in. Thick, .190 in. Head Height, Set of 8

COMP Cams Valve Lash Cap, 3/8 in. Valve Stem, .080 in. Thick, .190 in. Head Height, Set of 8

$47.93

Crow Cams Holden 6 Conical Valve Spring Kit

Crow Cams Holden 6 Conical Valve Spring Kit

$534.48

QA1 Shock Tuning Kit

QA1 Shock Tuning Kit

$18.62

MANLEY Valve Spring Retainer, 10 Degree, +.100 in, H-13, 1.550 in. OD, Double, Each

MANLEY Valve Spring Retainer, 10 Degree, +.100 in, H-13, 1.550 in. OD, Double, Each

$35.12

COMP Cams Valve Spring, Beehive Style, 1.290 in. OD, 1.800 in. Installed Height, 313 lbs./in. Rate, 324 lbs./in. Rate, Each

COMP Cams Valve Spring, Beehive Style, 1.290 in. OD, 1.800 in. Installed Height, 313 lbs./in. Rate, 324 lbs./in. Rate, Each

$36.83