Crow Cams valve springs are made from aircraft quality alloy steels to give the best performance and reliability at a reasonable price. They are specially designed to suit our high lift, high acceleration profiles. The following is a guide to popular applications, if your spring is not listed please see the spring specification chart on page xx or contact our technical staff. Making correct measurements before assembly is critical as many variables are present to catch the unwary. Note Dual Valve Springs may require head machining to fit. Dual Valve Springs measured with .100 Thick Retainer

More From This Category

COMP Cams Valve Lock, Steel, 10 Degree, 3/8 in, Single Groove, w/ Lash Cap Recess, Set of 12

COMP Cams Valve Lock, Steel, 10 Degree, 3/8 in, Single Groove, w/ Lash Cap Recess, Set of 12

$48.60

Crow Cams 1.25" x.812"x.030" SHIM

Crow Cams 1.25" x.812"x.030" SHIM

$0.93

AFR Retainer, Mopar Gen3 10° 1.250 OD Ti, Set of 16

AFR Retainer, Mopar Gen3 10° 1.250 OD Ti, Set of 16

$717.89

COMP Cams Valve Spring Shim, Steel, Hardened, 1.500 in. OD, .645 in. ID, .015 in, .030 in, .060 in. Thick, Set of 48

COMP Cams Valve Spring Shim, Steel, Hardened, 1.500 in. OD, .645 in. ID, .015 in, .030 in, .060 in. Thick, Set of 48

$69.95

Crow Cams V8 Beehive Spring Kit

Crow Cams V8 Beehive Spring Kit

$878.21

MANLEY Valve Lock, 10 Degree Machined, Conventional, Steel, .3715 in. Stem, Each

MANLEY Valve Lock, 10 Degree Machined, Conventional, Steel, .3715 in. Stem, Each

$9.68