Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.

More From This Category

Cometic Head Gasket, MLS, Ford 4.0l, BA-on Barra 96mm, Compressed Thickness, Each

Cometic Head Gasket, MLS, Ford 4.0l, BA-on Barra 96mm, Compressed Thickness, Each

$308.65

COMP Cams Engine Valve Spring Seat, ID Spring Locator, 1.300 in. OD, .520 in. ID, .060 in. Thick, Each

COMP Cams Engine Valve Spring Seat, ID Spring Locator, 1.300 in. OD, .520 in. ID, .060 in. Thick, Each

$9.94

COMP Cams Pushrod, Magnum, Chromoly, Heat-Treated 7.300 in. Long, .080 in. Wall, 3/8 in. Diameter, Each

COMP Cams Pushrod, Magnum, Chromoly, Heat-Treated 7.300 in. Long, .080 in. Wall, 3/8 in. Diameter, Each

$21.28

SAAS Catch Tank Banjo Hose Fitting 12mm 1/2

SAAS Catch Tank Banjo Hose Fitting 12mm 1/2

$15.04

Sonnax Tool Kit, Chrysler, Ford A4Ld, AOD, AODe, Chrys 518, Each

Sonnax Tool Kit, Chrysler, Ford A4Ld, AOD, AODe, Chrys 518, Each

$879.22