Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. It does absolutely no good to install a cam that will perform up to 8,000 rpm if you do not have the correct springs. Use the only valve springs that will give the recommended spring pressure with the valve both on the seat and at maximum lift. COMP Cams valve springs are offered in single and dual styles to meet your cam requirements.

More From This Category

MANLEY Valve Spring Shims, Hardened, Steel, 1.250 O.D, .015 in. Thick, Set of 50

MANLEY Valve Spring Shims, Hardened, Steel, 1.250 O.D, .015 in. Thick, Set of 50

$69.69

MANLEY Valve Spring, 1.106 in. OD, 274 lbs./in. Rate, 0.975 in. Coil Bind Height, For Honda KA20A3/K24A, Set of 16

MANLEY Valve Spring, 1.106 in. OD, 274 lbs./in. Rate, 0.975 in. Coil Bind Height, For Honda KA20A3/K24A, Set of 16

$399.25

MANLEY Valve Spring Shims, Hardened, Steel, 1.437 O.D, .015 in. Thick, Set of 50

MANLEY Valve Spring Shims, Hardened, Steel, 1.437 O.D, .015 in. Thick, Set of 50

$69.69

MANLEY Valve Lock, 10 Degree Machined, Bead Loc, Steel, 5/16 in. Stem, Set of 16

MANLEY Valve Lock, 10 Degree Machined, Bead Loc, Steel, 5/16 in. Stem, Set of 16

$154.80

Trick Flow Valve Spring Retainer, Chromoly Steel, 10 Degree, 1.550 in. Outside Diameter, .690 in. Inside Diameter, Each

Trick Flow Valve Spring Retainer, Chromoly Steel, 10 Degree, 1.550 in. Outside Diameter, .690 in. Inside Diameter, Each

$33.06