These COMP Cams Hi-Tech 210 degree pushrods were specifically designed for high-lift applications where pushrod and seat interference are problems at maximum lift. They're heat-treated to a minimum hardness of 60 on the Rockwell C scale, for the ultimate in strength. COMP Cams even gives them a black oxide finish and imprints the length and part number on them. In addition, they feature a 210 degree radius, rather than the standard 180 degree radius, so they'll work great with rocker arms that feature cup-type adjusters and applications requiring more load-bearing surface from the pushrod. If you are building a high-horsepower, high-rpm, high-lift camshaft engine, then you need to use these COMP Cams Hi-Tech 210 degree pushrods for maximum reliability.

More From This Category

COMP Cams Pushrod, Hi-Tech, Chromoly, Heat-Treated, 10.050 in. Long, .080 in. Wall, 3/8 in. Diameter, Set of 16

COMP Cams Pushrod, Hi-Tech, Chromoly, Heat-Treated, 10.050 in. Long, .080 in. Wall, 3/8 in. Diameter, Set of 16

$542.90

COMP Cams Pushrod, High Energy 7.205 in. Long, 5/16 in. Diameter, Set of 16

COMP Cams Pushrod, High Energy 7.205 in. Long, 5/16 in. Diameter, Set of 16

$111.38

COMP Cams Pushrod, Magnum, Chromoly, Heat-Treated 7.900 in. Long, .080 in. Wall, 3/8 in. Diameter, Each

COMP Cams Pushrod, Magnum, Chromoly, Heat-Treated 7.900 in. Long, .080 in. Wall, 3/8 in. Diameter, Each

$22.14

COMP Cams Pushrod, Hi-Tech, Chromoly, Heat-Treated, 8.425 in. Long, .080 in. Wall, 5/16 in. Diameter, Set of 16

COMP Cams Pushrod, Hi-Tech, Chromoly, Heat-Treated, 8.425 in. Long, .080 in. Wall, 5/16 in. Diameter, Set of 16

$423.35

COMP Cams Pushrod, High Energy 8.684 in. Long, 5/16 in. Diameter, Each

COMP Cams Pushrod, High Energy 8.684 in. Long, 5/16 in. Diameter, Each

$5.13